Hi Aidan,
Le mer. 26 oct. 2022 à 20:43:40 +0100, Aidan MacDonald
<aidanmacdonald.0x0@xxxxxxxxx> a écrit :
Add support for defining PLL clocks with od_bits = 0, meaning that
OD is fixed to 1 and there is no OD field in the register. In this
case od_max must also be 0, which is enforced with BUG_ON().
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
---
v1 -> v2: Simplify od lookup in ingenic_pll_recalc_rate() and
enforce od_max == 0 when od_bits is zero.
drivers/clk/ingenic/cgu.c | 21 +++++++++++++++------
drivers/clk/ingenic/cgu.h | 3 ++-
2 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 861c50d6cb24..3481129114b1 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -83,7 +83,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned
long parent_rate)
const struct ingenic_cgu_clk_info *clk_info =
to_clk_info(ingenic_clk);
struct ingenic_cgu *cgu = ingenic_clk->cgu;
const struct ingenic_cgu_pll_info *pll_info;
- unsigned m, n, od_enc, od;
+ unsigned m, n, od, od_enc = 0;
bool bypass;
u32 ctl;
@@ -96,8 +96,11 @@ ingenic_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
m += pll_info->m_offset;
n = (ctl >> pll_info->n_shift) & GENMASK(pll_info->n_bits - 1, 0);
n += pll_info->n_offset;
- od_enc = ctl >> pll_info->od_shift;
- od_enc &= GENMASK(pll_info->od_bits - 1, 0);
+
+ if (pll_info->od_bits > 0) {
+ od_enc = ctl >> pll_info->od_shift;
+ od_enc &= GENMASK(pll_info->od_bits - 1, 0);
+ }
if (pll_info->bypass_bit >= 0) {
ctl = readl(cgu->base + pll_info->bypass_reg);
@@ -112,7 +115,11 @@ ingenic_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
if (pll_info->od_encoding[od] == od_enc)
break;
}
I'd add a space there.
With that:
Reviewed-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- BUG_ON(od == pll_info->od_max);
+ /* if od_max = 0, od_bits should be 0 and od is fixed to 1. */
+ if (pll_info->od_max == 0)
+ BUG_ON(pll_info->od_bits != 0);
I don't think this first BUG_ON() is needed, if we do a good job
reviewing patches. But I don't care enough to ask you to remove it.
Cheers,
-Paul
+ else
+ BUG_ON(od == pll_info->od_max);
od++;
return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
@@ -215,8 +222,10 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned
long req_rate,
ctl &= ~(GENMASK(pll_info->n_bits - 1, 0) << pll_info->n_shift);
ctl |= (n - pll_info->n_offset) << pll_info->n_shift;
- ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
- ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
+ if (pll_info->od_bits > 0) {
+ ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
+ ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
+ }
writel(ctl, cgu->base + pll_info->reg);
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index 147b7df0d657..567142b584bb 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -33,7 +33,8 @@
* @od_shift: the number of bits to shift the post-VCO divider value
by (ie.
* the index of the lowest bit of the post-VCO divider
value in
* the PLL's control register)
- * @od_bits: the size of the post-VCO divider field in bits
+ * @od_bits: the size of the post-VCO divider field in bits, or 0 if
no
+ * OD field exists (then the OD is fixed to 1)
* @od_max: the maximum post-VCO divider value
* @od_encoding: a pointer to an array mapping post-VCO divider
values to
* their encoded values in the PLL control register,
or -1 for
--
2.38.1