Il 29/07/22 14:00, Konrad Dybcio ha scritto:
On 29.07.2022 12:44, AngeloGioacchino Del Regno wrote:
Add a basic support for the Sony Xperia M5 (codename "Holly")
smartphone, powered by a MediaTek Helio X10 SoC.
This achieves a console boot.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Hello Konrad,
First of all, I'm sorry for the very late reply.
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../dts/mediatek/mt6795-sony-xperia-m5.dts | 90 +++++++++++++++++++
2 files changed, 91 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index af362a085a02..72fd683c9264 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-sony-xperia-m5.dtb
-holly.dtb?
I prefer using the commercial name to identify the device.
"Holly" is the smartphone project codename and that is mentioned almost nowhere:
the aim here is to enhance readability as to make it immediately understandable
that this devicetree is for the Xperia M5 device.
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
new file mode 100644
index 000000000000..94d011c4126c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Collabora Ltd
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+#include "mt6795.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
Looks unused.
Right, I'll remove that in v2.
+
+/ {
+ model = "Sony Xperia M5";
+ compatible = "sony,xperia-m5", "mediatek,mt6795";
sony,holly?
I'm sorry, but I can't understand the sense of adding that compatible string to
the mix. To the kernel, it doesn't mean anything - and we already have another
string advertising the specific machine, which is "sony,xperia-m5".
Of course, there is no Xperia M5 with a different SoC and, even if there was a
xperia-m5 with a different SoC, we anyway have both a machine compatible and a
SoC compatible in here, so that would still not pose any issue.
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x1E800000>;
Lowercase hex in size. Also, doesn't the bootloader fill it in?
Updating the device to the latest software version will give you a bootloader
that fills that in, but the first-ever software release contains one that will
not do that in particular conditions (fastboot boot).
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 128 KiB reserved for ARM Trusted Firmware (BL31) */
Is that true for all devices with this SoC, or..? If so, it may be worth
moving this into mt6795.dtsi.
+ bl31_secmon_reserved: secmon@43000000 {
memory@, everywhere. Use labels to name the nodes.
I'm afraid that's not possible, as the bootloader is reading the devicetree
and requires these nodes to follow this naming.
+ no-map;
reg goes first.
Will fix in v2.
Best regards,
Angelo
