The driver for the codec, when resetting the chip, first drives the line
low, and then high. This means that the line is active low. Change the
annotation in the example DTS accordingly.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
index 51547190f709..2f5e0df93872 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -112,7 +112,7 @@ examples:
- |
codec {
compatible = "qcom,wcd9380-codec";
- reset-gpios = <&tlmm 32 0>;
+ reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <1>;
qcom,tx-device = <&wcd938x_tx>;
qcom,rx-device = <&wcd938x_rx>;
--
2.38.0.135.g90850a2211-goog
