[PATCH 02/11] arm64: dts: qcom: sc8280xp-pmics: Add temp alarm for PM8280_{1/2} PMICs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for temperature alarm feature in the PM8280_{1/2} PMICs.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 24836b6b9bbc..5de47b1434a4 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -33,6 +33,13 @@ pmc8280_1: pmic@1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8280_1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmc8280_1_gpios: gpio@8800 {
 			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
@@ -78,6 +85,13 @@ pmc8280_2: pmic@3 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8280_2_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmc8280_2_gpios: gpio@8800 {
 			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux