Re: [PATCH next 2/2] dt-bindings: gpio: add entry for hisilicon,gpio-ascend910

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 25/10/2022 23:42, Weilong Chen wrote:
> Add the new compatible for HiSilicon gpio controller driver.
> 
> Signed-off-by: Weilong Chen <chenweilong@xxxxxxxxxx>
> ---
>  .../gpio/hisilicon,gpio-ascend910.yaml        | 54 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/hisilicon,gpio-ascend910.yaml
> 
> diff --git a/Documentation/devicetree/bindings/gpio/hisilicon,gpio-ascend910.yaml b/Documentation/devicetree/bindings/gpio/hisilicon,gpio-ascend910.yaml
> new file mode 100644
> index 000000000000..912e4b808cae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/hisilicon,gpio-ascend910.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/hisilicon,gpio-ascend910.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiSilicon common GPIO controller Device Tree Bindings

Drop "Device Tree Bindings"

> +
> +maintainers:
> +  - Jay Fang <f.fangjian@xxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: hisilicon,gpio-ascend910
> +    description:
> +      The HiSilicon common GPIO controller can be used for many different
> +      types of SoC such as Huawei Ascend AI series chips.

Put this description in top-level description.

> +
> +  reg:
> +    description:
> +      Address and length of the register set for the device.

Drop description.

> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +  ngpios:
> +    minimum: 1
> +    maximum: 32
> +
> +required:
> +  - compatible
> +  - gpio-controller

gpio-cells are not required?

> +  - reg
> +  - interrupts
> +  - ngpios
> +
> +unevaluatedProperties: false

Instead:
additionalProperties: false

> +
> +examples:
> +  - |
> +    gpio@840d0000 {
> +      compatible = "hisilicon,gpio-ascend910";
> +      reg = <0x840d0000 0x1000>;
> +      ngpios = <0x20>;

Convention for counting is to use decimal numbers.

> +      gpio-controller;
> +      #gpio-cells = <2>;
> +      interrupts = <0x0 33 0x4>;

This looks like standard IRQ flags, so use respective defines.


Best regards,
Krzysztof