Add OTPC node along with temperature calibration cell.
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/sama7g5.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index 7bd8ae8e8d38..ccba1ba5336d 100644
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
/ {
model = "Microchip SAMA7G5 family SoC";
@@ -888,6 +889,17 @@ ddr3phy: ddr3phy@e3804000 {
reg = <0xe3804000 0x1000>;
};
+ otpc: otpc@e8c00000 {
+ compatible = "microchip,sama7g5-otpc", "syscon";
+ reg = <0xe8c00000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ temperature_calib: calib@1 {
+ reg = <OTP_PKT(1) 76>;
+ };
+ };
+
gic: interrupt-controller@e8c11000 {
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
--
2.34.1
