Hi, Yinbo,
On Wed, Oct 26, 2022 at 11:03 AM Yinbo Zhu <zhuyinbo@xxxxxxxxxxx> wrote:
>
> This driver provides support for clock controller on Loongson2 SoC
> , the Loongson2 SoC uses a 100MHz clock as the PLL reference clock
Use Loongson-2, including in commit message, Kconfig description and comments.
> , there are five independent PLLs inside, each of which PLL can
> provide up to three sets of frequency dependent clock outputs.
>
> Signed-off-by: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
> ---
> Change in v4:
> 1. Fixup clock-names that replace "xxx-clk" with "xxx".
>
> MAINTAINERS | 1 +
> arch/loongarch/Kconfig | 1 +
> arch/loongarch/kernel/time.c | 3 +
> drivers/clk/Kconfig | 9 ++
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-loongson2.c | 285 +++++++++++++++++++++++++++++++++++
> 6 files changed, 300 insertions(+)
> create mode 100644 drivers/clk/clk-loongson2.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b6aae412de9c..f01d60cd5c3b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11911,6 +11911,7 @@ LOONGSON2 SOC SERIES CLOCK DRIVER
> M: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
> L: linux-clk@xxxxxxxxxxxxxxx
> S: Maintained
> +F: drivers/clk/clk-loongson2.c
> F: include/dt-bindings/clock/loongson,ls2k-clk.h
>
> LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
> index 26aeb1408e56..8b65f349cd6e 100644
> --- a/arch/loongarch/Kconfig
> +++ b/arch/loongarch/Kconfig
> @@ -122,6 +122,7 @@ config LOONGARCH
> select USE_PERCPU_NUMA_NODE_ID
> select USER_STACKTRACE_SUPPORT
> select ZONE_DMA32
> + select COMMON_CLK
>
> config 32BIT
> bool
> diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c
> index 786735dcc8d6..09f20bc81798 100644
> --- a/arch/loongarch/kernel/time.c
> +++ b/arch/loongarch/kernel/time.c
> @@ -12,6 +12,7 @@
> #include <linux/kernel.h>
> #include <linux/sched_clock.h>
> #include <linux/spinlock.h>
> +#include <linux/of_clk.h>
>
> #include <asm/cpu-features.h>
> #include <asm/loongarch.h>
> @@ -214,6 +215,8 @@ int __init constant_clocksource_init(void)
>
> void __init time_init(void)
> {
> + of_clk_init(NULL);
> +
> if (!cpu_has_cpucfg)
> const_clock_freq = cpu_clock_freq;
> else
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 48f8f4221e21..88620f86373f 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -428,6 +428,15 @@ config COMMON_CLK_K210
> help
> Support for the Canaan Kendryte K210 RISC-V SoC clocks.
>
> +config COMMON_CLK_LOONGSON2
> + bool "Clock driver for Loongson2 SoC"
> + depends on COMMON_CLK && OF
> + help
> + This driver provides support for Clock Controller that base on
> + Common Clock Framework Controller (CCF) on Loongson2 SoC. The
> + Clock Controller can generates and supplies clock to various
> + peripherals within the SoC.
> +
> source "drivers/clk/actions/Kconfig"
> source "drivers/clk/analogbits/Kconfig"
> source "drivers/clk/baikal-t1/Kconfig"
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index d5db170d38d2..8ccc7436052f 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -75,6 +75,7 @@ obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o
> obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o
> obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
> obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
> +obj-$(CONFIG_COMMON_CLK_LOONGSON2) += clk-loongson2.o
>
> # please keep this section sorted lexicographically by directory path name
> obj-y += actions/
> diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c
> new file mode 100644
> index 000000000000..359fede40112
> --- /dev/null
> +++ b/drivers/clk/clk-loongson2.c
> @@ -0,0 +1,285 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Author: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
> + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
Why 2023?
Huacai
> + */
> +
> +#include <linux/clkdev.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <dt-bindings/clock/loongson,ls2k-clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/slab.h>
> +#include <linux/clk.h>
> +
> +#define LOONGSON2_PLL_MULT_SHIFT 32
> +#define LOONGSON2_PLL_MULT_WIDTH 10
> +#define LOONGSON2_PLL_DIV_SHIFT 26
> +#define LOONGSON2_PLL_DIV_WIDTH 6
> +#define LOONGSON2_APB_FREQSCALE_SHIFT 20
> +#define LOONGSON2_APB_FREQSCALE_WIDTH 3
> +#define LOONGSON2_USB_FREQSCALE_SHIFT 16
> +#define LOONGSON2_USB_FREQSCALE_WIDTH 3
> +#define LOONGSON2_SATA_FREQSCALE_SHIFT 12
> +#define LOONGSON2_SATA_FREQSCALE_WIDTH 3
> +
> +void __iomem *loongson2_pll_base;
> +static DEFINE_SPINLOCK(loongson2_clk_lock);
> +static struct clk_hw **hws;
> +static struct clk_hw_onecell_data *clk_hw_data;
> +
> +static struct clk_hw *loongson2_clk_register(struct device *dev,
> + const char *name,
> + const char *parent_name,
> + const struct clk_ops *ops,
> + unsigned long flags)
> +{
> + int ret;
> + struct clk_hw *hw;
> + struct clk_init_data init;
> +
> + /* allocate the divider */
> + hw = kzalloc(sizeof(*hw), GFP_KERNEL);
> + if (!hw)
> + return ERR_PTR(-ENOMEM);
> +
> + init.name = name;
> + init.ops = ops;
> + init.flags = flags | CLK_IS_BASIC;
> + init.parent_names = (parent_name ? &parent_name : NULL);
> + init.num_parents = (parent_name ? 1 : 0);
> + hw->init = &init;
> +
> + /* register the clock */
> + ret = clk_hw_register(dev, hw);
> + if (ret) {
> + kfree(hw);
> + hw = ERR_PTR(ret);
> + }
> +
> + return hw;
> +}
> +
> +static struct clk_hw *loongson2_clk_pll_register(const char *name,
> + const char *parent, void __iomem *reg)
> +{
> + u64 val;
> + u32 mult = 1, div = 1;
> +
> + val = readq((void *)reg);
> +
> + mult = (val >> LOONGSON2_PLL_MULT_SHIFT) &
> + clk_div_mask(LOONGSON2_PLL_MULT_WIDTH);
> + div = (val >> LOONGSON2_PLL_DIV_SHIFT) &
> + clk_div_mask(LOONGSON2_PLL_DIV_WIDTH);
> +
> + return clk_hw_register_fixed_factor(NULL, name, parent,
> + CLK_SET_RATE_PARENT, mult, div);
> +}
> +
> +static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + u64 val;
> + u32 mult;
> + unsigned long rate;
> +
> + val = readq((void *)(loongson2_pll_base + 0x50));
> +
> + mult = (val >> LOONGSON2_APB_FREQSCALE_SHIFT) &
> + clk_div_mask(LOONGSON2_APB_FREQSCALE_WIDTH);
> +
> + rate = parent_rate * (mult + 1);
> + do_div(rate, 8);
> +
> + return rate;
> +}
> +
> +static const struct clk_ops loongson2_apb_clk_ops = {
> + .recalc_rate = loongson2_apb_recalc_rate,
> +};
> +
> +static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + u64 val;
> + u32 mult;
> + unsigned long rate;
> +
> + val = readq((void *)(loongson2_pll_base + 0x50));
> +
> + mult = (val >> LOONGSON2_USB_FREQSCALE_SHIFT) &
> + clk_div_mask(LOONGSON2_USB_FREQSCALE_WIDTH);
> +
> + rate = parent_rate * (mult + 1);
> + do_div(rate, 8);
> +
> + return rate;
> +}
> +
> +static const struct clk_ops loongson2_usb_clk_ops = {
> + .recalc_rate = loongson2_usb_recalc_rate,
> +};
> +
> +static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + u64 val;
> + u32 mult;
> + unsigned long rate;
> +
> + val = readq((void *)(loongson2_pll_base + 0x50));
> +
> + mult = (val >> LOONGSON2_SATA_FREQSCALE_SHIFT) &
> + clk_div_mask(LOONGSON2_SATA_FREQSCALE_WIDTH);
> +
> + rate = parent_rate * (mult + 1);
> + do_div(rate, 8);
> +
> + return rate;
> +}
> +
> +static const struct clk_ops loongson2_sata_clk_ops = {
> + .recalc_rate = loongson2_sata_recalc_rate,
> +};
> +
> +static void loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < count; i++)
> + if (IS_ERR(clks[i]))
> + pr_err("Loongson2 clk %u: register failed with %ld\n"
> + , i, PTR_ERR(clks[i]));
> +}
> +
> +static struct clk_hw *loongson2_obtain_fixed_clk_hw(
> + struct device_node *np,
> + const char *name)
> +{
> + struct clk *clk;
> +
> + clk = of_clk_get_by_name(np, name);
> + if (IS_ERR(clk))
> + return ERR_PTR(-ENOENT);
> +
> + return __clk_get_hw(clk);
> +}
> +
> +static void __init loongson2_clocks_init(struct device_node *np)
> +{
> + loongson2_pll_base = of_iomap(np, 0);
> +
> + if (!loongson2_pll_base) {
> + pr_err("clk: unable to map loongson2 clk registers\n");
> + goto err;
> + }
> +
> + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, LOONGSON2_CLK_END),
> + GFP_KERNEL);
> + if (WARN_ON(!clk_hw_data))
> + goto err;
> +
> + clk_hw_data->num = LOONGSON2_CLK_END;
> + hws = clk_hw_data->hws;
> +
> + hws[LOONGSON2_REF_100M] = loongson2_obtain_fixed_clk_hw(np,
> + "ref_100m");
> +
> + hws[LOONGSON2_NODE_PLL] = loongson2_clk_pll_register("node_pll",
> + "ref_100m",
> + loongson2_pll_base);
> +
> + hws[LOONGSON2_DDR_PLL] = loongson2_clk_pll_register("ddr_pll",
> + "ref_100m",
> + loongson2_pll_base + 0x10);
> +
> + hws[LOONGSON2_DC_PLL] = loongson2_clk_pll_register("dc_pll",
> + "ref_100m",
> + loongson2_pll_base + 0x20);
> +
> + hws[LOONGSON2_PIX0_PLL] = loongson2_clk_pll_register("pix0_pll",
> + "ref_100m",
> + loongson2_pll_base + 0x30);
> +
> + hws[LOONGSON2_PIX1_PLL] = loongson2_clk_pll_register("pix1_pll",
> + "ref_100m",
> + loongson2_pll_base + 0x40);
> +
> + hws[LOONGSON2_NODE_CLK] = clk_hw_register_divider(NULL, "node",
> + "node_pll", 0,
> + loongson2_pll_base + 0x8, 0,
> + 6, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + /*
> + * The hda clk divisor in the upper 32bits and the clk-prodiver
> + * layer code doesn't support 64bit io operation thus a conversion
> + * is required that subtract shift by 32 and add 4byte to the hda
> + * address
> + */
> + hws[LOONGSON2_HDA_CLK] = clk_hw_register_divider(NULL, "hda",
> + "ddr_pll", 0,
> + loongson2_pll_base + 0x22, 12,
> + 7, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_GPU_CLK] = clk_hw_register_divider(NULL, "gpu",
> + "ddr_pll", 0,
> + loongson2_pll_base + 0x18, 22,
> + 6, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_DDR_CLK] = clk_hw_register_divider(NULL, "ddr",
> + "ddr_pll", 0,
> + loongson2_pll_base + 0x18, 0,
> + 6, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_GMAC_CLK] = clk_hw_register_divider(NULL, "gmac",
> + "dc_pll", 0,
> + loongson2_pll_base + 0x28, 22,
> + 6, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_DC_CLK] = clk_hw_register_divider(NULL, "dc",
> + "dc_pll", 0,
> + loongson2_pll_base + 0x28, 0,
> + 6, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_APB_CLK] = loongson2_clk_register(NULL, "apb",
> + "gmac",
> + &loongson2_apb_clk_ops, 0);
> +
> + hws[LOONGSON2_USB_CLK] = loongson2_clk_register(NULL, "usb",
> + "gmac",
> + &loongson2_usb_clk_ops, 0);
> +
> + hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(NULL, "sata",
> + "gmac",
> + &loongson2_sata_clk_ops, 0);
> +
> + hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0",
> + "pix0_pll", 0,
> + loongson2_pll_base + 0x38, 0, 6,
> + CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1",
> + "pix1_pll", 0,
> + loongson2_pll_base + 0x48, 0, 6,
> + CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + loongson2_check_clk_hws(hws, LOONGSON2_CLK_END);
> +
> + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
> +
> +err:
> + iounmap(loongson2_pll_base);
> +}
> +
> +CLK_OF_DECLARE(loongson2_clk, "loongson,ls2k-clk", loongson2_clocks_init);
> --
> 2.31.1
>
