Each of the CPSW9G ports in J721e support additional modes like QSGMII.
Add a new compatible for J721e to support the additional modes.
In TI's J721e, each of the CPSW9G ethernet interfaces can act as a
QSGMII main or QSGMII-SUB port. The QSGMII main interface is responsible
for performing auto-negotiation between the MAC and the PHY while the rest
of the interfaces are designated as QSGMII-SUB interfaces, indicating that
they will not be taking part in the auto-negotiation process.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
---
drivers/phy/ti/phy-gmii-sel.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index c8f30d2e1f46..8c667819c39a 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -218,6 +218,15 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw5g_soc_j7200 = {
.num_qsgmii_main_ports = 1,
};
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw9g_soc_j721e = {
+ .use_of_data = true,
+ .regfields = phy_gmii_sel_fields_am654,
+ .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
+ .num_ports = 8,
+ .num_qsgmii_main_ports = 2,
+};
+
static const struct of_device_id phy_gmii_sel_id_table[] = {
{
.compatible = "ti,am3352-phy-gmii-sel",
@@ -243,6 +252,10 @@ static const struct of_device_id phy_gmii_sel_id_table[] = {
.compatible = "ti,j7200-cpsw5g-phy-gmii-sel",
.data = &phy_gmii_sel_cpsw5g_soc_j7200,
},
+ {
+ .compatible = "ti,j721e-cpsw9g-phy-gmii-sel",
+ .data = &phy_gmii_sel_cpsw9g_soc_j721e,
+ },
{}
};
MODULE_DEVICE_TABLE(of, phy_gmii_sel_id_table);
--
2.25.1
