On Tue, 25 Oct 2022 15:52:40 +0200, Camel Guo wrote: > Add documentation and an example for Maxlinear's GSW Series Ethernet > switches. > > Signed-off-by: Camel Guo <camel.guo@xxxxxxxx> > --- > .../devicetree/bindings/net/dsa/mxl,gsw.yaml | 140 ++++++++++++++++++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > MAINTAINERS | 6 + > 3 files changed, 148 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/dsa/mxl,gsw.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/dsa/mxl,gsw.yaml: properties:mdio:allOf:0:$ref: 'http://devicetree.org/schemas/net/ethernet-phy.yaml#' should not be valid under {'pattern': '^https?://'} from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/dsa/mxl,gsw.example.dtb: switch@0: mdio: 'reg' is a required property From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/dsa/mxl,gsw.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
