Re: [PATCH 3/3] ARM: dts: suniv: Add Lctech Pi F1C200s devicetree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



在 2022-10-25星期二的 15:59 +0100,Andre Przywara写道:
> The Lctech Pi F1C200s (also previously known under the Cherry Pi
> brand)

Oh? Are they the same hardware?

> is a small development board with the Allwinner F1C200s SoC. This is
> the
> same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM.
> 
> Alongside the obligatory micro-SD card slot, the board features a
> SPI-NAND flash chip, LCD and touch connectors, and unpopulated
> expansion header pins.
> There are two USB Type-C ports on the board: One supplies the power,
> also
> connects to the USB MUSB OTG controller port. The other one is
> connected
> to an CH340 USB serial chip, which in turn is connected to UART1.
> 
> Add a devicetree file, so that the board can be used easily.
> 
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile                    |  1 +
>  arch/arm/boot/dts/suniv-f1c100s.dtsi          |  5 ++
>  arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts | 80
> +++++++++++++++++++
>  3 files changed, 86 insertions(+)
>  create mode 100644 arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 6abf6434eb372..f99c5c20bf7ef 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1394,6 +1394,7 @@ dtb-$(CONFIG_MACH_SUN9I) += \
>         sun9i-a80-cubieboard4.dtb
>  dtb-$(CONFIG_MACH_SUNIV) += \
>         suniv-f1c100s-licheepi-nano.dtb \
> +       suniv-f1c200s-lctech-pi.dtb \
>         suniv-f1c200s-popstick-v1.1.dtb
>  dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
>         tegra20-acer-a500-picasso.dtb \
> diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi
> b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> index 0f24c766c9fc5..2ec022e92eea8 100644
> --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
> +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> @@ -201,6 +201,11 @@ uart0_pe_pins: uart0-pe-pins {
>                                 pins = "PE0", "PE1";
>                                 function = "uart0";
>                         };
> +
> +                       uart1_pa_pins: uart1-pa-pins {
> +                               pins = "PA2", "PA3";
> +                               function = "uart1";
> +                       };

Should this be in a splitted commit?

>                 };
>  
>                 timer@1c20c00 {
> diff --git a/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
> b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
> new file mode 100644
> index 0000000000000..a9d1778395438
> --- /dev/null
> +++ b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
> @@ -0,0 +1,80 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 Arm Ltd,
> + * based on work:
> + *   Copyright 2022 Icenowy Zheng <uwu@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +#include "suniv-f1c100s.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +       model = "Lctech Pi F1C200s";
> +       compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
> +                    "allwinner,suniv-f1c100s";
> +
> +       aliases {
> +               mmc0 = &mmc0;
> +               serial0 = &uart1;
> +               spi0 = &spi0;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +       };
> +
> +       reg_vcc3v3: regulator-3v3 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vcc3v3";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +       };
> +};
> +
> +&mmc0 {
> +       broken-cd;
> +       bus-width = <4>;
> +       disable-wp;
> +       vmmc-supply = <&reg_vcc3v3>;
> +       status = "okay";
> +};
> +
> +&otg_sram {
> +       status = "okay";
> +};
> +
> +&spi0 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&spi0_pc_pins>;
> +       status = "okay";
> +
> +       flash@0 {
> +               compatible = "spi-nand";
> +               reg = <0>;
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               spi-max-frequency = <40000000>;
> +       };
> +};
> +
> +&uart1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart1_pa_pins>;
> +       status = "okay";
> +};
> +
> +/*
> + * This is a Type-C socket, but CC1/2 are not connected, and VBUS is
> connected
> + * to Vin, which supplies the board. Host mode works (if the board
> is powered
> + * otherwise), but peripheral is probably the intention.
> + */
> +&usb_otg {
> +       dr_mode = "peripheral";
> +       status = "okay";
> +};

Finally we should get able to override dr_mode just by HW.

> +
> +&usbphy {
> +       status = "okay";
> +};





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux