Re: [RFC net-next 1/2] dt-bindings: net: dsa: add bindings for GSW Series switches

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 25/10/2022 09:52, Camel Guo wrote:
> Add documentation and an example for Maxlinear's GSW Series Ethernet
> switches.
> 
> Signed-off-by: Camel Guo <camel.guo@xxxxxxxx>
> ---
>  .../devicetree/bindings/net/dsa/mxl,gsw.yaml  | 140 ++++++++++++++++++
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  MAINTAINERS                                   |   6 +
>  3 files changed, 148 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/dsa/mxl,gsw.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mxl,gsw.yaml b/Documentation/devicetree/bindings/net/dsa/mxl,gsw.yaml
> new file mode 100644
> index 000000000000..8e124b7ec58c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/dsa/mxl,gsw.yaml

Filename based on compatible, so mxl,gsw145-mdio.yaml. But see below.

> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/dsa/mxl,gsw.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Maxlinear GSW Series Switch Device Tree Bindings

Drop "Device Tree Bindings"

> +
> +allOf:
> +  - $ref: dsa.yaml#
> +
> +maintainers:
> +  - Camel Guo <camel.guo@xxxxxxxx>
> +
> +description:
> +  The Maxlinear's GSW Series Ethernet Switch is a highly integrated, low-power,
> +  non-blocking Gigabit Ethernet Switch.
> +
> +properties:
> +  compatible:
> +    oneOf:

You do not have multiple choices, so no need for oneOf

> +      - enum:
> +          - mxl,gsw145-mdio

Why "mdio" suffix?

> +
> +  reg:
> +    maxItems: 1
> +
> +  mdio:
> +    type: object
> +
> +    description:
> +      Container of ethernet phy devices on the MDIO bus of GSW switch
> +
> +    properties:
> +      '#address-cells':
> +        const: 1
> +      '#size-cells':
> +        const: 0
> +
> +    allOf:

No need for allOf

> +      - $ref: "http://devicetree.org/schemas/net/ethernet-phy.yaml#";

That's not an URL. Open other schemas using ethernet-phy and check how
they are doing.

You miss:

    unevaluatedProperties: false

> +
> +required:
> +  - compatible
> +  - reg
> +  - mdio
> +
> +additionalProperties: true

This cannot be true. Again - open existing bindings and do like they are
doing, not differently.

You wanted here unevaluatedProperties: false.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    mdio {

Hmmm... switch with MDIO is part of MDIO?

> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        switch@0 {
> +            compatible = "mxl,gsw145-mdio";
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            reg = <0x0>;

reg is a second property

> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +

Best regards,
Krzysztof