Remove unused variants of PCI indirect handling.
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
---
arch/microblaze/include/asm/pci-bridge.h | 34 -------
arch/microblaze/pci/Makefile | 2 +-
arch/microblaze/pci/indirect_pci.c | 158 -------------------------------
arch/microblaze/pci/xilinx_pci.c | 6 --
4 files changed, 1 insertion(+), 199 deletions(-)
delete mode 100644 arch/microblaze/pci/indirect_pci.c
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 170369d..cd9ae71 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -32,8 +32,6 @@ struct pci_controller {
int first_busno;
int last_busno;
- int self_busno;
-
void __iomem *io_base_virt;
resource_size_t io_base_phys;
@@ -42,34 +40,6 @@ struct pci_controller {
*/
resource_size_t pci_mem_offset;
- struct pci_ops *ops;
- unsigned int __iomem *cfg_addr;
- void __iomem *cfg_data;
-
- /*
- * Used for variants of PCI indirect handling and possible quirks:
- * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
- * EXT_REG - provides access to PCI-e extended registers
- * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
- * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
- * to determine which bus number to match on when generating type0
- * config cycles
- * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
- * hanging if we don't have link and try to do config cycles to
- * anything but the PHB. Only allow talking to the PHB if this is
- * set.
- * BIG_ENDIAN - cfg_addr is a big endian register
- * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs
- * on the PLB4. Effectively disable MRM commands by setting this.
- */
-#define INDIRECT_TYPE_SET_CFG_TYPE 0x00000001
-#define INDIRECT_TYPE_EXT_REG 0x00000002
-#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004
-#define INDIRECT_TYPE_NO_PCIE_LINK 0x00000008
-#define INDIRECT_TYPE_BIG_ENDIAN 0x00000010
-#define INDIRECT_TYPE_BROKEN_MRM 0x00000020
- u32 indirect_type;
-
/* Currently, we limit ourselves to 1 IO range and 3 mem
* ranges since the common pci_bus structure can't handle more
*/
@@ -91,9 +61,5 @@ static inline int isa_vaddr_is_ioport(void __iomem *address)
}
#endif /* CONFIG_PCI */
-extern void setup_indirect_pci(struct pci_controller *hose,
- resource_size_t cfg_addr,
- resource_size_t cfg_data, u32 flags);
-
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */
diff --git a/arch/microblaze/pci/Makefile b/arch/microblaze/pci/Makefile
index 0251c20..3cbdf25 100644
--- a/arch/microblaze/pci/Makefile
+++ b/arch/microblaze/pci/Makefile
@@ -3,5 +3,5 @@
# Makefile
#
-obj-$(CONFIG_PCI) += pci-common.o indirect_pci.o iomap.o
+obj-$(CONFIG_PCI) += pci-common.o iomap.o
obj-$(CONFIG_PCI_XILINX) += xilinx_pci.o
diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c
deleted file mode 100644
index 1caf7d3..0000000
--- a/arch/microblaze/pci/indirect_pci.c
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (C) 1998 Gabriel Paubert.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <linux/io.h>
-#include <asm/pci-bridge.h>
-
-static int
-indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 *val)
-{
- struct pci_controller *hose = pci_bus_to_host(bus);
- volatile void __iomem *cfg_data;
- u8 cfg_type = 0;
- u32 bus_no, reg;
-
- if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
- if (bus->number != hose->first_busno)
- return PCIBIOS_DEVICE_NOT_FOUND;
- if (devfn != 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
- if (bus->number != hose->first_busno)
- cfg_type = 1;
-
- bus_no = (bus->number == hose->first_busno) ?
- hose->self_busno : bus->number;
-
- if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
- reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
- else
- reg = offset & 0xfc; /* Only 3 bits for function */
-
- if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
- out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
- (devfn << 8) | reg | cfg_type));
- else
- out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
- (devfn << 8) | reg | cfg_type));
-
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */
- switch (len) {
- case 1:
- *val = in_8(cfg_data);
- break;
- case 2:
- *val = in_le16(cfg_data);
- break;
- default:
- *val = in_le32(cfg_data);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 val)
-{
- struct pci_controller *hose = pci_bus_to_host(bus);
- volatile void __iomem *cfg_data;
- u8 cfg_type = 0;
- u32 bus_no, reg;
-
- if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
- if (bus->number != hose->first_busno)
- return PCIBIOS_DEVICE_NOT_FOUND;
- if (devfn != 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
- if (bus->number != hose->first_busno)
- cfg_type = 1;
-
- bus_no = (bus->number == hose->first_busno) ?
- hose->self_busno : bus->number;
-
- if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
- reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
- else
- reg = offset & 0xfc;
-
- if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
- out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
- (devfn << 8) | reg | cfg_type));
- else
- out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
- (devfn << 8) | reg | cfg_type));
-
- /* suppress setting of PCI_PRIMARY_BUS */
- if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
- if ((offset == PCI_PRIMARY_BUS) &&
- (bus->number == hose->first_busno))
- val &= 0xffffff00;
-
- /* Workaround for PCI_28 Errata in 440EPx/GRx */
- if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) &&
- offset == PCI_CACHE_LINE_SIZE) {
- val = 0;
- }
-
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- cfg_data = hose->cfg_data + (offset & 3);
- switch (len) {
- case 1:
- out_8(cfg_data, val);
- break;
- case 2:
- out_le16(cfg_data, val);
- break;
- default:
- out_le32(cfg_data, val);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pci_ops = {
- .read = indirect_read_config,
- .write = indirect_write_config,
-};
-
-void __init
-setup_indirect_pci(struct pci_controller *hose,
- resource_size_t cfg_addr,
- resource_size_t cfg_data, u32 flags)
-{
- resource_size_t base = cfg_addr & PAGE_MASK;
- void __iomem *mbase;
-
- mbase = ioremap(base, PAGE_SIZE);
- hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK);
- if ((cfg_data & PAGE_MASK) != base)
- mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
- hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK);
- hose->ops = &indirect_pci_ops;
- hose->indirect_type = flags;
-}
diff --git a/arch/microblaze/pci/xilinx_pci.c b/arch/microblaze/pci/xilinx_pci.c
index 3fa16e3..5dc4182 100644
--- a/arch/microblaze/pci/xilinx_pci.c
+++ b/arch/microblaze/pci/xilinx_pci.c
@@ -83,7 +83,6 @@ static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
*/
void __init xilinx_pci_init(void)
{
- struct pci_controller *hose;
struct resource r;
void __iomem *pci_reg;
struct device_node *pci_node;
@@ -97,11 +96,6 @@ void __init xilinx_pci_init(void)
return;
}
- /* Setup config space */
- setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
- r.start + XPLB_PCI_DATA,
- INDIRECT_TYPE_SET_CFG_TYPE);
-
/* Set the max bus number to 255, and bus/subbus no's to 0 */
pci_reg = of_iomap(pci_node, 0);
WARN_ON(!pci_reg);
--
1.8.3.1
