Re: [PATCH] ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1

[Alexandre TORGUE <alexandre.torgue@xxxxxxxxxxx>]

Hi Fabrice,

On 9/30/22 16:56, Fabrice Gasnier wrote:
> Add support for USB2514B onboard hub on stm32mp157c EV1 board. The HUB
> is supplied by a 3v3 PMIC regulator.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
> ---
>   arch/arm/boot/dts/stm32mp157c-ev1.dts | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> index e22e394832a8..a0ff92662e02 100644
> --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> @@ -362,6 +362,14 @@ &usart3 {
>   &usbh_ehci {
>   	phys = <&usbphyc_port0>;
>   	status = "okay";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	/* onboard HUB */
> +	hub@1 {
> +		compatible = "usb424,2514";
> +		reg = <1>;
> +		vdd-supply = <&v3v3>;
> +	};
>   };
>   
>   &usbotg_hs {

Applied on stm32-next.

Thanks
Alex