Add support for USB2514B onboard hub on stm32mp157c EV1 board. The HUB
is supplied by a 3v3 PMIC regulator.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
---
arch/arm/boot/dts/stm32mp157c-ev1.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index e22e394832a8..a0ff92662e02 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -362,6 +362,14 @@ &usart3 {
&usbh_ehci {
phys = <&usbphyc_port0>;
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* onboard HUB */
+ hub@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ vdd-supply = <&v3v3>;
+ };
};
&usbotg_hs {
--
2.25.1
