The X1000's CGU supplies the I2S system clock to the AIC module
and ultimately the audio codec, represented by the "i2s" clock.
It is a simple mux which can either pass through EXCLK or a PLL
multiplied by a fractional divider (the "i2s_pll" clock).
The AIC contains a separate 1/N divider controlled by the I2S
driver, which generates the bit clock from the system clock.
The frame clock is always fixed to 1/64th of the bit clock.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
---
drivers/clk/ingenic/x1000-cgu.c | 69 +++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index b2ce3fb83f54..341276e5e1ef 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -8,6 +8,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/rational.h>
#include <dt-bindings/clock/ingenic,x1000-cgu.h>
@@ -168,6 +169,37 @@ static const struct clk_ops x1000_otg_phy_ops = {
.is_enabled = x1000_usb_phy_is_enabled,
};
+static void
+x1000_i2spll_calc_m_n_od(const struct ingenic_cgu_pll_info *pll_info,
+ unsigned long rate, unsigned long parent_rate,
+ unsigned int *pm, unsigned int *pn, unsigned int *pod)
+{
+ const unsigned long m_max = GENMASK(pll_info->m_bits - 1, 0);
+ const unsigned long n_max = GENMASK(pll_info->n_bits - 1, 0);
+ unsigned long m, n;
+
+ rational_best_approximation(rate, parent_rate, m_max, n_max, &m, &n);
+
+ /* n should not be less than 2*m */
+ if (n < 2 * m)
+ n = 2 * m;
+
+ *pm = m;
+ *pn = n;
+ *pod = 1;
+}
+
+static void
+x1000_i2spll_set_rate_hook(const struct ingenic_cgu_pll_info *pll_info,
+ unsigned long rate, unsigned long parent_rate)
+{
+ /*
+ * For some reason, the I2S divider doesn't work properly after
+ * updating I2SCDR unless I2SCDR1 is read & written back.
+ */
+ writel(readl(cgu->base + CGU_REG_I2SCDR1), cgu->base + CGU_REG_I2SCDR1);
+}
+
static const s8 pll_od_encoding[8] = {
0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
};
@@ -319,6 +351,37 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.gate = { CGU_REG_CLKGR, 25 },
},
+ [X1000_CLK_I2SPLLMUX] = {
+ "i2s_pll_mux", CGU_CLK_MUX,
+ .parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL, -1, -1 },
+ .mux = { CGU_REG_I2SCDR, 31, 1 },
+ },
+
+ [X1000_CLK_I2SPLL] = {
+ "i2s_pll", CGU_CLK_PLL,
+ .parents = { X1000_CLK_I2SPLLMUX, -1, -1, -1 },
+ .pll = {
+ .reg = CGU_REG_I2SCDR,
+ .rate_multiplier = 1,
+ .m_shift = 13,
+ .m_bits = 9,
+ .n_shift = 0,
+ .n_bits = 13,
+ .calc_m_n_od = x1000_i2spll_calc_m_n_od,
+ .set_rate_hook = x1000_i2spll_set_rate_hook,
+ },
+ },
+
+ [X1000_CLK_I2S] = {
+ "i2s", CGU_CLK_MUX,
+ .parents = { X1000_CLK_EXCLK, -1, -1, X1000_CLK_I2SPLL },
+ /*
+ * NOTE: the mux is at bit 30; bit 29 enables the M/N divider.
+ * Therefore, the divider is disabled when EXCLK is selected.
+ */
+ .mux = { CGU_REG_I2SCDR, 29, 2 },
+ },
+
[X1000_CLK_LCD] = {
"lcd", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL },
@@ -426,6 +489,12 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.gate = { CGU_REG_CLKGR, 9 },
},
+ [X1000_CLK_AIC] = {
+ "aic", CGU_CLK_GATE,
+ .parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 11 },
+ },
+
[X1000_CLK_UART0] = {
"uart0", CGU_CLK_GATE,
.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
--
2.38.1
