Convert the TI CDCE925 clock binding to DT schema format. Including a small fix: Add the missing 'ti' prefix in the example compatible. Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> --- I have to admit I only have one specific addon platform for this hardware, which is actually a CECD813 tbh. .../devicetree/bindings/clock/ti,cdce925.txt | 53 --------- .../devicetree/bindings/clock/ti,cdce925.yaml | 104 ++++++++++++++++++ 2 files changed, 104 insertions(+), 53 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/ti,cdce925.txt create mode 100644 Documentation/devicetree/bindings/clock/ti,cdce925.yaml diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt deleted file mode 100644 index df42ab72718f..000000000000 --- a/Documentation/devicetree/bindings/clock/ti,cdce925.txt +++ /dev/null @@ -1,53 +0,0 @@ -Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers. - -Reference -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] https://www.ti.com/product/cdce913 -[3] https://www.ti.com/product/cdce925 -[4] https://www.ti.com/product/cdce937 -[5] https://www.ti.com/product/cdce949 - -The driver provides clock sources for each output Y1 through Y5. - -Required properties: - - compatible: Shall be one of the following: - - "ti,cdce913": 1-PLL, 3 Outputs - - "ti,cdce925": 2-PLL, 5 Outputs - - "ti,cdce937": 3-PLL, 7 Outputs - - "ti,cdce949": 4-PLL, 9 Outputs - - reg: I2C device address. - - clocks: Points to a fixed parent clock that provides the input frequency. - - #clock-cells: From common clock bindings: Shall be 1. - -Optional properties: - - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a - board, or to compensate for external influences. -- vdd-supply: A regulator node for Vdd -- vddout-supply: A regulator node for Vddout - -For all PLL1, PLL2, ... an optional child node can be used to specify spread -spectrum clocking parameters for a board. - - spread-spectrum: SSC mode as defined in the data sheet. - - spread-spectrum-center: Use "centered" mode instead of "max" mode. When - present, the clock runs at the requested frequency on average. Otherwise - the requested frequency is the maximum value of the SCC range. - - -Example: - - clockgen: cdce925pw@64 { - compatible = "cdce925"; - reg = <0x64>; - clocks = <&xtal_27Mhz>; - #clock-cells = <1>; - xtal-load-pf = <5>; - vdd-supply = <&1v8-reg>; - vddout-supply = <&3v3-reg>; - /* PLL options to get SSC 1% centered */ - PLL2 { - spread-spectrum = <4>; - spread-spectrum-center; - }; - }; diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.yaml b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml new file mode 100644 index 000000000000..1e68ee68e458 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti,cdce925.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI CDCE913/925/937/949 programmable I2C clock synthesizers node bindings + +maintainers: + - Mike Looijmans <mike.looijmans@xxxxxxxx> + +description: | + Flexible Low Power LVCMOS Clock Generator with SSC Support for EMI Reduction + + - CDCE(L)913: 1-PLL, 3 Outputs https://www.ti.com/product/cdce913 + - CDCE(L)925: 2-PLL, 5 Outputs https://www.ti.com/product/cdce925 + - CDCE(L)937: 3-PLL, 7 Outputs https://www.ti.com/product/cdce937 + - CDCE(L)949: 4-PLL, 9 Outputs https://www.ti.com/product/cdce949 + +properties: + $nodename: + pattern: "^clock-controller$" + + compatible: + enum: + - ti,cdce913 + - ti,cdce925 + - ti,cdce937 + - ti,cdce949 + + reg: + maxItems: 1 + + clocks: + items: + - description: fixed parent clock + + "#clock-cells": + const: 1 + + vdd-supply: + description: Regulator that provides 1.8V Vdd power supply + + vddout-supply: + description: | + Regulator that provides Vddout power supply. + non-L variant: 2.5V or 3.3V for + L variant: 1.8V for + + xtal-load-pf: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Crystal load-capacitor value to fine-tune performance on a + board, or to compensate for external influences. + +patternProperties: + "^PLL[1-4]$": + type: object + description: | + optional child node can be used to specify spread + spectrum clocking parameters for a board + + properties: + spread-spectrum: + $ref: /schemas/types.yaml#/definitions/uint32 + description: SSC mode as defined in the data sheet + + spread-spectrum-center: + type: boolean + description: | + Use "centered" mode instead of "max" mode. When + present, the clock runs at the requested frequency on average. + Otherwise the requested frequency is the maximum value of the + SCC range. + +required: + - compatible + - ret + - clocks + - "#clock-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cdce925: clock-controller@64 { + compatible = "ti,cdce925"; + reg = <0x64>; + clocks = <&xtal_27Mhz>; + #clock-cells = <1>; + xtal-load-pf = <5>; + vdd-supply = <®_1v8>; + vddout-supply = <®_3v3>; + /* PLL options to get SSC 1% centered */ + PLL2 { + spread-spectrum = <4>; + spread-spectrum-center; + }; + }; + }; -- 2.25.1
