From: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
Add iommu and power-domain support, and add examples for MT8195, which
has two PCIe ports with different clocks and phys.
Signed-off-by: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
Signed-off-by: TingHan Shen <tinghan.shen@xxxxxxxxxxxx>
---
.../bindings/pci/mediatek-pcie-gen3.yaml | 115 ++++++++++++++++++
1 file changed, 115 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
index c00be39af64e..089074b5fa95 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -70,6 +70,12 @@ properties:
minItems: 1
maxItems: 8
+ iommu-map:
+ maxItems: 1
+
+ iommu-map-mask:
+ maxItems: 1
+
resets:
minItems: 1
maxItems: 2
@@ -107,6 +113,9 @@ properties:
items:
- const: pcie-phy
+ power-domains:
+ maxItems: 1
+
'#interrupt-cells':
const: 1
@@ -191,3 +200,109 @@ examples:
};
};
};
+
+ - |
+ #include <dt-bindings/clock/mt8195-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/memory/mt8195-memory-port.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/power/mt8195-power.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie0: pcie@112f0000 {
+ compatible = "mediatek,mt8195-pcie", "mediatek,mt8192-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x00 0x112f0000 0x00 0x4000>;
+ reg-names = "pcie-mac";
+ interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0x00 0x20000000 0x00
+ 0x20000000 0x00 0x200000>,
+ <0x82000000 0x00 0x20200000 0x00
+ 0x20200000 0x00 0x3e00000>;
+
+ iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE0 0x2>;
+ iommu-map-mask = <0x0>;
+
+ clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+ <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+ clock-names = "pl_250m", "tl_26m", "tl_96m",
+ "tl_32k", "peri_26m", "peri_mem";
+ assigned-clocks = <&topckgen CLK_TOP_TL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+ phys = <&pciephy>;
+ phy-names = "pcie-phy";
+
+ power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ pcie1: pcie@112f8000 {
+ compatible = "mediatek,mt8195-pcie", "mediatek,mt8192-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x00 0x112f8000 0x00 0x4000>;
+ reg-names = "pcie-mac";
+ interrupts = <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH 0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0x00 0x24000000 0x00
+ 0x24000000 0x00 0x200000>,
+ <0x82000000 0x00 0x24200000 0x00
+ 0x24200000 0x00 0x3e00000>;
+
+ iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE1 0x2>;
+ iommu-map-mask = <0x0>;
+
+ clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P1>,
+ <&clk26m>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+ <&clk26m>,
+ <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+ /* Designer has connect pcie1 with peri_mem_p0 clock */
+ <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+ clock-names = "pl_250m", "tl_26m", "tl_96m",
+ "tl_32k", "peri_26m", "peri_mem";
+ assigned-clocks = <&topckgen CLK_TOP_TL_P1>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+ phys = <&u3port1 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy";
+
+ power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
--
2.18.0
