On Fri, 14 Oct 2022 23:32:52 +0200, MichaÅ? Grzelak wrote: > Convert the marvell,pp2 bindings from text to proper schema. > > Move 'marvell,system-controller' and 'dma-coherent' properties from > port up to the controller node, to match what is actually done in DT. > > Rename all subnodes to match "^(ethernet-)?port@[0-2]$" and deprecate > port-id in favour of 'reg'. > > Signed-off-by: MichaÅ? Grzelak <mig@xxxxxxxxxxxx> > --- > .../devicetree/bindings/net/marvell,pp2.yaml | 305 ++++++++++++++++++ > .../devicetree/bindings/net/marvell-pp2.txt | 141 -------- > MAINTAINERS | 2 +- > 3 files changed, 306 insertions(+), 142 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/marvell,pp2.yaml > delete mode 100644 Documentation/devicetree/bindings/net/marvell-pp2.txt > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/ ethernet@0: 'eth0', 'eth1', 'eth2' do not match any of the regexes: '^(ethernet-)?port@[0-2]$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/marvell/armada-7040-db.dtb arch/arm64/boot/dts/marvell/armada-7040-mochabin.dtb arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb arch/arm64/boot/dts/marvell/armada-8040-db.dtb arch/arm64/boot/dts/marvell/armada-8040-db.dtb arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dtb arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dtb arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dtb arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dtb arch/arm64/boot/dts/marvell/cn9130-crb-A.dtb arch/arm64/boot/dts/marvell/cn9130-crb-B.dtb arch/arm64/boot/dts/marvell/cn9130-db-B.dtb arch/arm64/boot/dts/marvell/cn9130-db.dtb arch/arm64/boot/dts/marvell/cn9131-db-B.dtb arch/arm64/boot/dts/marvell/cn9131-db-B.dtb arch/arm64/boot/dts/marvell/cn9131-db.dtb arch/arm64/boot/dts/marvell/cn9131-db.dtb arch/arm64/boot/dts/marvell/cn9132-db-B.dtb arch/arm64/boot/dts/marvell/cn9132-db-B.dtb arch/arm64/boot/dts/marvell/cn9132-db-B.dtb arch/arm64/boot/dts/marvell/cn9132-db.dtb arch/arm64/boot/dts/marvell/cn9132-db.dtb arch/arm64/boot/dts/marvell/cn9132-db.dtb ethernet@f0000: 'eth0', 'eth1' do not match any of the regexes: '^(ethernet-)?port@[0-2]$', 'pinctrl-[0-9]+' arch/arm/boot/dts/armada-375-db.dtb