On Wed, Oct 12, 2022 at 11:46 AM Tim Harvey <tharvey@xxxxxxxxxxxxx> wrote: > > On Tue, Oct 11, 2022 at 4:13 PM Marek Vasut <marex@xxxxxxx> wrote: > > > > On 10/11/22 22:10, Tim Harvey wrote: > > > On Fri, Jul 8, 2022 at 1:57 AM Peng Fan (OSS) <peng.fan@xxxxxxxxxxx> wrote: > > >> > > >> From: Peng Fan <peng.fan@xxxxxxx> > > >> > > >> V4: > > >> Because the header is not included when adding NoC node, the fsl,imx8mp.h > > >> needs be included in this patchset. So include it in patch 6 > > >> > > >> V3: > > >> Move adding NoC node patch to i.MX8MP ICC driver patchset > > >> Per Lucas's comments, warn once when icc bulk get not return probe defer and continue. > > >> > > >> V2: > > >> Use a low bandwidth value instead INT_MAX > > >> Minor fix to move fsl,imx8mp.h out to dts patch, not driver patch > > >> Add A-b tag from DT maintainer > > >> > > >> i.MX8MP NoC settings is invalid after related power domain up. So > > >> need to set valid values after power domain up. > > >> > > >> This patchset is to bind interconnect for each entry in blk ctrl. > > >> > > >> This patchset is not include DVFS DDRC feature. > > >> > > >> Peng Fan (7): > > >> dt-bindings: soc: imx: add interconnect property for i.MX8MP media blk > > >> ctrl > > >> dt-bindings: soc: imx: add interconnect property for i.MX8MP hdmi blk > > >> ctrl > > >> dt-bindings: soc: imx: add interconnect property for i.MX8MP hsio blk > > >> ctrl > > >> soc: imx: add icc paths for i.MX8MP media blk ctrl > > >> soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl > > >> arm64: dts: imx8mp: add interconnects for media blk ctrl > > >> arm64: dts: imx8mp: add interconnect for hsio blk ctrl > > >> > > >> .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml | 9 +++++ > > >> .../soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml | 10 +++++ > > >> .../soc/imx/fsl,imx8mp-media-blk-ctrl.yaml | 14 +++++++ > > >> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 18 +++++++++ > > >> drivers/soc/imx/imx8m-blk-ctrl.c | 39 +++++++++++++++++++ > > >> drivers/soc/imx/imx8mp-blk-ctrl.c | 35 +++++++++++++++++ > > >> 6 files changed, 125 insertions(+) > > >> > > >> -- > > >> 2.25.1 > > >> > > > > > > Hi Peng, > > > > > > I built origin/master from commit 041bc24d867a today for an imx8mp > > > board and am running into errors that appear to be introduced by this > > > series: > > > [ 15.177372] platform 381f0040.usb-phy: deferred probe pending > > > [ 15.183155] platform 382f0040.usb-phy: deferred probe pending > > > [ 15.188928] platform 33800000.pcie: deferred probe pending > > > [ 15.194439] platform 32ec0000.blk-ctrl: deferred probe pending > > > [ 15.200287] platform 38330000.blk-ctrl: deferred probe pending > > > [ 15.206129] platform 32f10000.blk-ctrl: deferred probe pending > > > [ 15.211974] platform 32f10100.usb: deferred probe pending > > > [ 15.217382] platform 32f10108.usb: deferred probe pending > > > [ 15.222791] platform cpufreq-dt: deferred probe pending > > > # cat /sys/kernel/debug/devices_deferred > > > 381f0040.usb-phy platform: supplier 32f10000.blk-ctrl not ready > > > 382f0040.usb-phy platform: supplier 32f10000.blk-ctrl not ready > > > 33800000.pcie platform: supplier 32f10000.blk-ctrl not ready > > > 32ec0000.blk-ctrl imx8m-blk-ctrl: failed to get noc entries > > > 38330000.blk-ctrl imx8m-blk-ctrl: failed to get noc entries > > > 32f10000.blk-ctrl imx8mp-blk-ctrl: failed to get noc entries > > > 32f10100.usb platform: supplier 32f10000.blk-ctrl not ready > > > 32f10108.usb platform: supplier 32f10000.blk-ctrl not ready > > > cpufreq-dt > > > > > > Is there a driver I'm perhaps missing that is needed now or are there > > > some patches that come from a different unmerged tree needed? > > > > Do you have these enabled ? > > > > CONFIG_INTERCONNECT_IMX8MM=y > > CONFIG_INTERCONNECT_IMX8MN=y > > CONFIG_INTERCONNECT_IMX8MQ=y > > CONFIG_INTERCONNECT_IMX8MP=y > > Marek, > > Yes, I have those as well as CONFIG_ARCH_NXP which appears new for 6.1 enabled. > > Best Regards, > > Tim I see this issue on origin/master 1440f5760228 using arch/arm64/configs/defconfig. It seems to me that the imx8m*_blk_ctrl_probe will all defer now until perhaps all the drivers using interconnects can probe, such as g1/lcdif etc? Some added debugging shows me: [ 14.951371] of_icc_bulk_get path lcdif-rd err=-517 [ 14.956205] devm_of_icc_bulk_get ret=-517 [ 14.960562] imx8m_blk_ctrl_probe failed -517 [ 14.967191] of_icc_bulk_get path g1 err=-517 [ 14.971487] devm_of_icc_bulk_get ret=-517 [ 14.975614] imx8m_blk_ctrl_probe failed -517 [ 14.982200] of_icc_bulk_get path usb1 err=-517 [ 14.986680] devm_of_icc_bulk_get ret=-517 [ 14.990709] imx8mp_blk_ctrl_probe 0:usb1 [ 14.994641] imx8mp_blk_ctrl_probe 1:usb2 [ 15.002086] platform 381f0040.usb-phy: deferred probe pending [ 15.007875] platform 382f0040.usb-phy: deferred probe pending [ 15.013636] platform 32f00000.pcie-phy: deferred probe pending [ 15.019480] platform 33800000.pcie: deferred probe pending [ 15.024975] platform 32ec0000.blk-ctrl: deferred probe pending [ 15.030819] platform 38330000.blk-ctrl: deferred probe pending [ 15.036662] platform 32f10000.blk-ctrl: deferred probe pending [ 15.042503] platform 32f10100.usb: deferred probe pending [ 15.047912] platform 32f10108.usb: deferred probe pending Best Regards, Tim
