On Tue, Oct 11, 2022 at 4:13 PM Marek Vasut <marex@xxxxxxx> wrote: > > On 10/11/22 22:10, Tim Harvey wrote: > > On Fri, Jul 8, 2022 at 1:57 AM Peng Fan (OSS) <peng.fan@xxxxxxxxxxx> wrote: > >> > >> From: Peng Fan <peng.fan@xxxxxxx> > >> > >> V4: > >> Because the header is not included when adding NoC node, the fsl,imx8mp.h > >> needs be included in this patchset. So include it in patch 6 > >> > >> V3: > >> Move adding NoC node patch to i.MX8MP ICC driver patchset > >> Per Lucas's comments, warn once when icc bulk get not return probe defer and continue. > >> > >> V2: > >> Use a low bandwidth value instead INT_MAX > >> Minor fix to move fsl,imx8mp.h out to dts patch, not driver patch > >> Add A-b tag from DT maintainer > >> > >> i.MX8MP NoC settings is invalid after related power domain up. So > >> need to set valid values after power domain up. > >> > >> This patchset is to bind interconnect for each entry in blk ctrl. > >> > >> This patchset is not include DVFS DDRC feature. > >> > >> Peng Fan (7): > >> dt-bindings: soc: imx: add interconnect property for i.MX8MP media blk > >> ctrl > >> dt-bindings: soc: imx: add interconnect property for i.MX8MP hdmi blk > >> ctrl > >> dt-bindings: soc: imx: add interconnect property for i.MX8MP hsio blk > >> ctrl > >> soc: imx: add icc paths for i.MX8MP media blk ctrl > >> soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl > >> arm64: dts: imx8mp: add interconnects for media blk ctrl > >> arm64: dts: imx8mp: add interconnect for hsio blk ctrl > >> > >> .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml | 9 +++++ > >> .../soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml | 10 +++++ > >> .../soc/imx/fsl,imx8mp-media-blk-ctrl.yaml | 14 +++++++ > >> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 18 +++++++++ > >> drivers/soc/imx/imx8m-blk-ctrl.c | 39 +++++++++++++++++++ > >> drivers/soc/imx/imx8mp-blk-ctrl.c | 35 +++++++++++++++++ > >> 6 files changed, 125 insertions(+) > >> > >> -- > >> 2.25.1 > >> > > > > Hi Peng, > > > > I built origin/master from commit 041bc24d867a today for an imx8mp > > board and am running into errors that appear to be introduced by this > > series: > > [ 15.177372] platform 381f0040.usb-phy: deferred probe pending > > [ 15.183155] platform 382f0040.usb-phy: deferred probe pending > > [ 15.188928] platform 33800000.pcie: deferred probe pending > > [ 15.194439] platform 32ec0000.blk-ctrl: deferred probe pending > > [ 15.200287] platform 38330000.blk-ctrl: deferred probe pending > > [ 15.206129] platform 32f10000.blk-ctrl: deferred probe pending > > [ 15.211974] platform 32f10100.usb: deferred probe pending > > [ 15.217382] platform 32f10108.usb: deferred probe pending > > [ 15.222791] platform cpufreq-dt: deferred probe pending > > # cat /sys/kernel/debug/devices_deferred > > 381f0040.usb-phy platform: supplier 32f10000.blk-ctrl not ready > > 382f0040.usb-phy platform: supplier 32f10000.blk-ctrl not ready > > 33800000.pcie platform: supplier 32f10000.blk-ctrl not ready > > 32ec0000.blk-ctrl imx8m-blk-ctrl: failed to get noc entries > > 38330000.blk-ctrl imx8m-blk-ctrl: failed to get noc entries > > 32f10000.blk-ctrl imx8mp-blk-ctrl: failed to get noc entries > > 32f10100.usb platform: supplier 32f10000.blk-ctrl not ready > > 32f10108.usb platform: supplier 32f10000.blk-ctrl not ready > > cpufreq-dt > > > > Is there a driver I'm perhaps missing that is needed now or are there > > some patches that come from a different unmerged tree needed? > > Do you have these enabled ? > > CONFIG_INTERCONNECT_IMX8MM=y > CONFIG_INTERCONNECT_IMX8MN=y > CONFIG_INTERCONNECT_IMX8MQ=y > CONFIG_INTERCONNECT_IMX8MP=y Marek, Yes, I have those as well as CONFIG_ARCH_NXP which appears new for 6.1 enabled. Best Regards, Tim
