[PATCH v3 3/4] arm64: dts: fix UART drive strength values as per FSD HW UM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Drive strength values used for UART is not reflecting the default values
recommended by FSD HW UM.

Fix the drive strength values for UART, thereby ensuring that the existing
device tree file is using default drive strength values recommended by UM
for FSD SoC.

Fixes: 684dac402f21 ("arm64: dts: fsd: Add initial pinctrl support")
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
index 09a492b1fd6e..a2634e70925a 100644
--- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -309,14 +309,14 @@
 		samsung,pins = "gpb7-0", "gpb7-1";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	uart1_data: uart1-data-pins {
 		samsung,pins = "gpb7-4", "gpb7-5";
 		samsung,pin-function = <FSD_PIN_FUNC_2>;
 		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
-		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
 
 	spi0_bus: spi0-bus-pins {
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux