[PATCH 0/3] Cadence PCIe PHY latency for PTM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Everyone,

this series adds PHY latency properties to the Cadence PCIe
driver to improve PTM accuracy, and configures the necessary
values for TI's AM64x processors.

These latencies are implementation specific and need to be
configured in the PCIe IP core's registers to allow the
PCIe controller to exactly determine the RX/TX timestamps for
PCIe PTM messages.

TI doesn't document these values in the datasheet or reference
manual as of now, but provided the necessary data via TI's E2E
forums (see PATCH 3/3).

Best Regards,

Dominic

Alexander Bahle (3):
  dt-bindings: PCI: cdns: Add PHY latency properties
  PCI: cadence: Use DT bindings to set PHY latencies
  arm64: dts: ti: k3-am64-main: Add latency DT binding

 .../bindings/pci/cdns,cdns-pcie-ep.yaml       |  2 +
 .../bindings/pci/cdns,cdns-pcie-host.yaml     |  2 +
 .../devicetree/bindings/pci/cdns-pcie-ep.yaml | 20 +++++
 .../bindings/pci/cdns-pcie-host.yaml          | 20 +++++
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      |  4 +
 .../pci/controller/cadence/pcie-cadence-ep.c  |  2 +
 .../controller/cadence/pcie-cadence-host.c    |  1 +
 drivers/pci/controller/cadence/pcie-cadence.c | 81 +++++++++++++++++++
 drivers/pci/controller/cadence/pcie-cadence.h | 23 ++++++
 9 files changed, 155 insertions(+)


base-commit: a185a0995518a3355c8623c95c36aaaae489de10
-- 
2.36.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux