This patchset introduces support for F1C100s' USB and SourceParts PopStick board. As I switched to a new mail address, and this patchset contains patches authored before this change, a mailmap update is added. The DT binding and driver support for SUNIV USB PHY/MUSB are added, in addition to DT changes to the DTSI and Lichee Nano DT. A new DT is added for SourceParts PopStick v1.1 board. Icenowy Zheng (10): mailmap: update Icenowy Zheng's mail address dt-bindings: phy: add binding document for Allwinner F1C100s USB PHY dt-bindings: usb: sunxi-musb: add F1C100s MUSB compatible string phy: sun4i-usb: add support for the USB PHY on F1C100s SoC musb: sunxi: add support for the F1C100s MUSB controller ARM: suniv: add USB-related device nodes ARM: suniv: f1c100s: enable USB on Lichee Pi Nano dt-bindings: vendor-prefixes: add Source Parts dt-binding: arm: sunxi: add compatible strings for PopStick v1.1 ARM: dts: suniv: add device tree for PopStick v1.1 .mailmap | 3 + .../devicetree/bindings/arm/sunxi.yaml | 7 ++ .../phy/allwinner,suniv-f1c100s-usb-phy.yaml | 83 ++++++++++++++ .../usb/allwinner,sun4i-a10-musb.yaml | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 3 +- .../boot/dts/suniv-f1c100s-licheepi-nano.dts | 16 +++ arch/arm/boot/dts/suniv-f1c100s.dtsi | 26 +++++ .../boot/dts/suniv-f1c200s-popstick-v1.1.dts | 101 ++++++++++++++++++ drivers/phy/allwinner/phy-sun4i-usb.c | 11 ++ drivers/usb/musb/sunxi.c | 8 +- 11 files changed, 258 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml create mode 100644 arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts -- 2.37.1
