On 11/10/2022 14:55, nick.hawkins@xxxxxxx wrote: > From: Nick Hawkins <nick.hawkins@xxxxxxx> > > The hpe,gxp-plreg binding provides access to the board i/o through the > Programmable logic interface. The binding provides information to enable > use of the same driver across the HPE portfolio. > > Signed-off-by: Nick Hawkins <nick.hawkins@xxxxxxx> > --- > .../bindings/soc/hpe/hpe,gxp-plreg.yaml | 43 +++++++++++++++++++ > 1 file changed, 43 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/hpe/hpe,gxp-plreg.yaml > > diff --git a/Documentation/devicetree/bindings/soc/hpe/hpe,gxp-plreg.yaml b/Documentation/devicetree/bindings/soc/hpe/hpe,gxp-plreg.yaml > new file mode 100644 > index 000000000000..cdc54e66d9a9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/hpe/hpe,gxp-plreg.yaml > @@ -0,0 +1,43 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/soc/hpe/hpe,gxp-plreg.yaml#"; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; Drop quotes from both lines. > + > +title: HPE GXP Programmable Logic Registers Controller > + > +maintainers: > + - Nick Hawkins <nick.hawkins@xxxxxxx> > + > +properties: > + compatible: > + items: > + - const: hpe,gxp-plreg > + - const: simple-mfd > + - const: syscon Blank line > + reg: > + maxItems: 1 > + > +required: > + - compatible > + > +additionalProperties: true This must be false... and then you will see the errors to fix. > + > +examples: > + - | > + cpld@1e789000 { > + compatible = "hpe,gxp-plreg", "simple-mfd", "syscon"; > + reg = <0x1e789000 0x1000>; > + fan1 { fan (or fan-1) > + bit = <0x01>; > + inst = <0x27>; > + id = <0x2B>; > + }; > + iopled1 { led or led-1? > + on = <0x04 0x01>; > + }; > + pwrbtn { power-button? > + latch = <0xFF 0xFF 0x04>; Keep lower case hex everywhere. > + }; > + }; > + Best regards, Krzysztof
