From: Nick Hawkins <nick.hawkins@xxxxxxx> The hpe,gxp-plreg binding provides access to the board i/o through the Programmable logic interface. The binding provides information to enable use of the same driver across the HPE portfolio. Signed-off-by: Nick Hawkins <nick.hawkins@xxxxxxx> --- .../bindings/soc/hpe/hpe,gxp-plreg.yaml | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/hpe/hpe,gxp-plreg.yaml diff --git a/Documentation/devicetree/bindings/soc/hpe/hpe,gxp-plreg.yaml b/Documentation/devicetree/bindings/soc/hpe/hpe,gxp-plreg.yaml new file mode 100644 index 000000000000..cdc54e66d9a9 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/hpe/hpe,gxp-plreg.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/hpe/hpe,gxp-plreg.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: HPE GXP Programmable Logic Registers Controller + +maintainers: + - Nick Hawkins <nick.hawkins@xxxxxxx> + +properties: + compatible: + items: + - const: hpe,gxp-plreg + - const: simple-mfd + - const: syscon + reg: + maxItems: 1 + +required: + - compatible + +additionalProperties: true + +examples: + - | + cpld@1e789000 { + compatible = "hpe,gxp-plreg", "simple-mfd", "syscon"; + reg = <0x1e789000 0x1000>; + fan1 { + bit = <0x01>; + inst = <0x27>; + id = <0x2B>; + }; + iopled1 { + on = <0x04 0x01>; + }; + pwrbtn { + latch = <0xFF 0xFF 0x04>; + }; + }; + -- 2.17.1
