Re: [PATCH v2] arm64: dts: qcom: sm8250-edo: Add NXP PN553 NFC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2022-10-08 20:17:13, Konrad Dybcio wrote:
> Add a node for NXP PN553 NFC, using the nxp-nci driver.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>

[On Sony Xperia 5 II, pdx206]
Tested-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>

> ---
> Changes since v1:
> - dropped useless label
> - use generic node name

Thanks!

> 
>  arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> index f7d7f502f48b..ae94065c6daa 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
> @@ -462,7 +462,16 @@ &i2c1 {
>  	status = "okay";
>  	clock-frequency = <400000>;
>  
> -	/* NXP PN553 NFC @ 28 */
> +	nfc@28 {
> +		compatible = "nxp,nxp-nci-i2c";
> +		reg = <0x28>;
> +
> +		interrupt-parent = <&tlmm>;
> +		interrupts = <111 IRQ_TYPE_EDGE_RISING>;
> +
> +		enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
> +		firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> +	};
>  };
>  
>  &i2c2 {
> -- 
> 2.37.3
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux