Add a node for NXP PN553 NFC, using the nxp-nci driver.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
Changes since v1:
- dropped useless label
- use generic node name
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index f7d7f502f48b..ae94065c6daa 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -462,7 +462,16 @@ &i2c1 {
status = "okay";
clock-frequency = <400000>;
- /* NXP PN553 NFC @ 28 */
+ nfc@28 {
+ compatible = "nxp,nxp-nci-i2c";
+ reg = <0x28>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <111 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ };
};
&i2c2 {
--
2.37.3
