Hi Rob,
Thanks for the feedback.
> Subject: Re: [PATCH v3 1/4] dt-bindings: mfd: Document RZ/G2L MTU3a
> bindings
>
> On Thu, Oct 06, 2022 at 02:57:14PM +0100, Biju Das wrote:
> > The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in
> > the Renesas RZ/G2L family SoC's. It consists of eight 16-bit timer
> > channels and one 32-bit timer channel. It supports the following
> > functions
> > - Counter
> > - Timer
> > - PWM
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> > v2->v3:
> > * Dropped counter bindings and integrated with mfd as it has only
> one property.
> > * Removed "#address-cells" and "#size-cells" as it do not have
> children with
> > unit addresses.
> > * Removed quotes from counter and pwm.
> > * Provided full path for pwm bindings.
> > * Updated the example.
> > v1->v2:
> > * Modelled counter and pwm as a single device that handles
> > multiple channels.
> > * Moved counter and pwm bindings to respective subsystems
> > * Dropped 'bindings' from MFD binding title.
> > * Updated the example
> > * Changed the compatible names.
> > ---
> > .../bindings/mfd/renesas,rz-mtu3.yaml | 304
> ++++++++++++++++++
> > .../bindings/pwm/renesas,rz-mtu3-pwm.yaml | 50 +++
> > 2 files changed, 354 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml
> > create mode 100644
> > Documentation/devicetree/bindings/pwm/renesas,rz-mtu3-pwm.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml
> > b/Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml
> > new file mode 100644
> > index 000000000000..44c952ad8d35
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml
> > @@ -0,0 +1,304 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> >
> > +
> > +title: Renesas RZ/G2L Multi-Function Timer Pulse Unit 3 (MTU3a)
> > +
> > +maintainers:
> > + - Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > +
> > +description: |
> > + This hardware block pconsisting of eight 16-bit timer channels
> and
> > +one
> > + 32- bit timer channel. It supports the following specifications:
> > + - Pulse input/output: 28 lines max.
> > + - Pulse input 3 lines
> > + - Count clock 11 clocks for each channel (14 clocks for MTU0,
> 12 clocks
> > + for MTU2, and 10 clocks for MTU5, four clocks for MTU1-MTU2
> combination
> > + (when LWA = 1))
> > + - Operating frequency Up to 100 MHz
> > + - Available operations [MTU0 to MTU4, MTU6, MTU7, and MTU8]
> > + - Waveform output on compare match
> > + - Input capture function (noise filter setting available)
> > + - Counter-clearing operation
> > + - Simultaneous writing to multiple timer counters (TCNT)
> > + (excluding MTU8).
> > + - Simultaneous clearing on compare match or input capture
> > + (excluding MTU8).
> > + - Simultaneous input and output to registers in
> synchronization with
> > + counter operations (excluding MTU8).
> > + - Up to 12-phase PWM output in combination with synchronous
> operation
> > + (excluding MTU8)
> > + - [MTU0 MTU3, MTU4, MTU6, MTU7, and MTU8]
> > + - Buffer operation specifiable
> > + - [MTU1, MTU2]
> > + - Phase counting mode can be specified independently
> > + - 32-bit phase counting mode can be specified for
> interlocked operation
> > + of MTU1 and MTU2 (when TMDR3.LWA = 1)
> > + - Cascade connection operation available
> > + - [MTU3, MTU4, MTU6, and MTU7]
> > + - Through interlocked operation of MTU3/4 and MTU6/7, the
> positive and
> > + negative signals in six phases (12 phases in total) can
> be output in
> > + complementary PWM and reset-synchronized PWM operation.
> > + - In complementary PWM mode, values can be transferred from
> buffer
> > + registers to temporary registers at crests and troughs of
> the timer-
> > + counter values or when the buffer registers (TGRD
> registers in MTU4
> > + and MTU7) are written to.
> > + - Double-buffering selectable in complementary PWM mode.
> > + - [MTU3 and MTU4]
> > + - Through interlocking with MTU0, a mode for driving AC
> synchronous
> > + motors (brushless DC motors) by using complementary PWM
> output and
> > + reset-synchronized PWM output is settable and allows the
> selection
> > + of two types of waveform output (chopping or level).
> > + - [MTU5]
> > + - Capable of operation as a dead-time compensation counter.
> > + - [MTU0/MTU5, MTU1, MTU2, and MTU8]
> > + - 32-bit phase counting mode specifiable by combining MTU1
> and MTU2 and
> > + through interlocked operation with MTU0/MTU5 and MTU8.
> > + - Interrupt-skipping function
> > + - In complementary PWM mode, interrupts on crests and
> troughs of counter
> > + values and triggers to start conversion by the A/D
> converter can be
> > + skipped.
> > + - Interrupt sources: 43 sources.
> > + - Buffer operation:
> > + - Automatic transfer of register data (transfer from the
> buffer
> > + register to the timer register).
> > + - Trigger generation
> > + - A/D converter start triggers can be generated
> > + - A/D converter start request delaying function enables A/D
> converter
> > + to be started with any desired timing and to be
> synchronized with
> > + PWM output.
> > + - Low power consumption function
> > + - The MTU3a can be placed in the module-stop state.
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - renesas,r9a07g044-mtu3 # RZ/G2{L,LC}
> > + - renesas,r9a07g054-mtu3 # RZ/V2L
> > + - const: renesas,rz-mtu3
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + items:
> > + - description: MTU0.TGRA input capture/compare match
> > + - description: MTU0.TGRB input capture/compare match
> > + - description: MTU0.TGRC input capture/compare match
> > + - description: MTU0.TGRD input capture/compare match
> > + - description: MTU0.TCNT overflow
> > + - description: MTU0.TGRE compare match
> > + - description: MTU0.TGRF compare match
> > + - description: MTU1.TGRA input capture/compare match
> > + - description: MTU1.TGRB input capture/compare match
> > + - description: MTU1.TCNT overflow
> > + - description: MTU1.TCNT underflow
> > + - description: MTU2.TGRA input capture/compare match
> > + - description: MTU2.TGRB input capture/compare match
> > + - description: MTU2.TCNT overflow
> > + - description: MTU2.TCNT underflow
> > + - description: MTU3.TGRA input capture/compare match
> > + - description: MTU3.TGRB input capture/compare match
> > + - description: MTU3.TGRC input capture/compare match
> > + - description: MTU3.TGRD input capture/compare match
> > + - description: MTU3.TCNT overflow
> > + - description: MTU4.TGRA input capture/compare match
> > + - description: MTU4.TGRB input capture/compare match
> > + - description: MTU4.TGRC input capture/compare match
> > + - description: MTU4.TGRD input capture/compare match
> > + - description: MTU4.TCNT overflow/underflow
> > + - description: MTU5.TGRU input capture/compare match
> > + - description: MTU5.TGRV input capture/compare match
> > + - description: MTU5.TGRW input capture/compare match
> > + - description: MTU6.TGRA input capture/compare match
> > + - description: MTU6.TGRB input capture/compare match
> > + - description: MTU6.TGRC input capture/compare match
> > + - description: MTU6.TGRD input capture/compare match
> > + - description: MTU6.TCNT overflow
> > + - description: MTU7.TGRA input capture/compare match
> > + - description: MTU7.TGRB input capture/compare match
> > + - description: MTU7.TGRC input capture/compare match
> > + - description: MTU7.TGRD input capture/compare match
> > + - description: MTU7.TCNT overflow/underflow
> > + - description: MTU8.TGRA input capture/compare match
> > + - description: MTU8.TGRB input capture/compare match
> > + - description: MTU8.TGRC input capture/compare match
> > + - description: MTU8.TGRD input capture/compare match
> > + - description: MTU8.TCNT overflow
> > + - description: MTU8.TCNT underflow
> > +
> > + interrupt-names:
> > + items:
> > + - const: tgia0
> > + - const: tgib0
> > + - const: tgic0
> > + - const: tgid0
> > + - const: tgiv0
> > + - const: tgie0
> > + - const: tgif0
> > + - const: tgia1
> > + - const: tgib1
> > + - const: tgiv1
> > + - const: tgiu1
> > + - const: tgia2
> > + - const: tgib2
> > + - const: tgiv2
> > + - const: tgiu2
> > + - const: tgia3
> > + - const: tgib3
> > + - const: tgic3
> > + - const: tgid3
> > + - const: tgiv3
> > + - const: tgia4
> > + - const: tgib4
> > + - const: tgic4
> > + - const: tgid4
> > + - const: tgiv4
> > + - const: tgiu5
> > + - const: tgiv5
> > + - const: tgiw5
> > + - const: tgia6
> > + - const: tgib6
> > + - const: tgic6
> > + - const: tgid6
> > + - const: tgiv6
> > + - const: tgia7
> > + - const: tgib7
> > + - const: tgic7
> > + - const: tgid7
> > + - const: tgiv7
> > + - const: tgia8
> > + - const: tgib8
> > + - const: tgic8
> > + - const: tgid8
> > + - const: tgiv8
> > + - const: tgiu8
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + resets:
> > + maxItems: 1
> > +
> > + counter:
> > + description:
> > + There are two phase counting modes. 16-bit phase counting
> mode in which
> > + MTU1 and MTU2 operate independently, and cascade connection
> 32-bit phase
> > + counting mode in which MTU1 and MTU2 are cascaded.
> > +
> > + In phase counting mode, the phase difference between two
> external input
> > + clocks is detected and the corresponding TCNT is incremented
> or
> > + decremented.
> > + The below counters are supported
> > + count0 - MTU1 16-bit phase counting
> > + count1 - MTU2 16-bit phase counting
> > + count2 - MTU1+ MTU2 32-bit phase counting
> > +
> > + type: object
> > +
> > + properties:
> > + compatible:
> > + const: renesas,rz-mtu3-counter
> > +
> > + required:
> > + - compatible
> > +
> > + additionalProperties: false
> > +
> > + pwm:
> > + $ref: /schemas/pwm/renesas,rz-mtu3-pwm.yaml
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - interrupt-names
> > + - clocks
> > + - power-domains
> > + - resets
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/r9a07g044-cpg.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + mtu3: timer@10001200 {
> > + compatible = "renesas,r9a07g044-mtu3", "renesas,rz-mtu3";
> > + reg = <0x10001200 0xb00>;
> > + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
> > + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
> "tgiv0", "tgie0",
> > + "tgif0",
> > + "tgia1", "tgib1", "tgiv1", "tgiu1",
> > + "tgia2", "tgib2", "tgiv2", "tgiu2",
> > + "tgia3", "tgib3", "tgic3", "tgid3",
> "tgiv3",
> > + "tgia4", "tgib4", "tgic4", "tgid4",
> "tgiv4",
> > + "tgiu5", "tgiv5", "tgiw5",
> > + "tgia6", "tgib6", "tgic6", "tgid6",
> "tgiv6",
> > + "tgia7", "tgib7", "tgic7", "tgid7",
> "tgiv7",
> > + "tgia8", "tgib8", "tgic8", "tgid8",
> "tgiv8", "tgiu8";
> > + clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
> > + power-domains = <&cpg>;
> > + resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
> > +
> > + counter {
> > + compatible = "renesas,rz-mtu3-counter";
>
> You don't have any resources for the counter in DT, so you don't even
> need a node here. Just have the parent driver instaniate the counter
> driver.
OK will remove the node and compatible(renesas,rz-mtu3-counter) and will add
support for parent driver Instaniate the counter driver by just using
"renesas,rz-mtu3" as it has resources.
>
> > + };
> > +
> > + pwm {
> > + compatible = "renesas,rz-mtu3-pwm";
> > + #pwm-cells = <2>;
>
> Here too, just declaring a PWM provider. Just move this to the parent
> node.
OK, will remove node and compatible. Will add support for parent driver instaniate
the PWM driver and also declaring as a PWM provider.
Cheers,
Biju
