[PATCH v3 0/4] Add RZ/G2L MTU3a MFD, Counter and pwm driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in
the Renesas RZ/G2L family SoC's. It consists of eight 16-bit timer
channels and one 32-bit timer channel. It supports the following
functions
 - Counter
 - Timer
 - PWM

This patch series aim to add MFD and pwm driver for MTU3a.

The 8/16/32 bit registers are mixed in each channel. The HW
specifications of the IP is described in patch#1.

Current patch set is tested for PWM mode1 on MTU3 channel
and 16 and 32 bit phase counting modes.

v2->v3:
 * Dropped counter bindings and integrated with mfd as it has only one property.
 * Removed "#address-cells" and "#size-cells" as it do not have children with
   unit addresses.
 * Removed quotes from counter and pwm.
 * Provided full path for pwm bindings.
 * Updated the binding example.
 * removed unwanted header files
 * Added LUT for 32 bit registers as it needed for 32-bit cascade counting.
 * Exported 32 bit read/write functions.
 * Modelled as a counter device supporting 3 counters(2 16-bit and 
   32-bit)
 * Add kernel-doc comments to document struct rz_mtu3_cnt
 * Removed mmio variable from struct rz_mtu3_cnt
 * Removed cnt local variable from rz_mtu3_count_read()
 * Replaced -EINVAL->-ERANGE for out of range error conditions.
 * Removed explicit cast from write functions.
 * Removed local variable val from rz_mtu3_count_ceiling_read()
 * Added lock for RMW for counter/ceiling updates.
 * Added different synapses for counter0 and counter{1,2}
 * Used ARRAY for assigning num_counts.
 * Added PM runtime for managing clocks.
 * Add MODULE_IMPORT_NS(COUNTER) to import the COUNTER namespace.

RFC->v2:
 * replaced devm_reset_control_get->devm_reset_control_get_exclusive
 * Dropped 'bindings' from the binding title
 * Updated the binding example
 * Added additionalProperties: false for counter bindings
 * Squashed all the binding patches
 * Modelled as a single counter device providing both 16-bit
   and 32-bit phase counting modes
 * Modelled as a single pwm device for supporting different pwm modes.
 * Moved counter and pwm bindings to respective subsystems.

Biju Das (4):
  dt-bindings: mfd: Document RZ/G2L MTU3a bindings
  mfd: Add RZ/G2L MTU3 driver
  pwm: Add support for RZ/G2L MTU3 PWM
  counter: Add RZ/G2L MTU3 counter driver

 .../bindings/mfd/renesas,rz-mtu3.yaml         | 304 ++++++++++
 .../bindings/pwm/renesas,rz-mtu3-pwm.yaml     |  50 ++
 drivers/counter/Kconfig                       |   9 +
 drivers/counter/Makefile                      |   1 +
 drivers/counter/rz-mtu3-cnt.c                 | 568 ++++++++++++++++++
 drivers/mfd/Kconfig                           |   9 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/rz-mtu3.c                         | 436 ++++++++++++++
 drivers/pwm/Kconfig                           |  11 +
 drivers/pwm/Makefile                          |   1 +
 drivers/pwm/pwm-rz-mtu3.c                     | 462 ++++++++++++++
 include/linux/mfd/rz-mtu3.h                   | 183 ++++++
 12 files changed, 2035 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml
 create mode 100644 Documentation/devicetree/bindings/pwm/renesas,rz-mtu3-pwm.yaml
 create mode 100644 drivers/counter/rz-mtu3-cnt.c
 create mode 100644 drivers/mfd/rz-mtu3.c
 create mode 100644 drivers/pwm/pwm-rz-mtu3.c
 create mode 100644 include/linux/mfd/rz-mtu3.h

-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux