Hi all,
This series tries to make the correct thing to represent in schema
all the current documentation related with MIPS CPUs.
Broadcom cpus node is a bit special and need to use the property
'mips-hpt-frequency' in the cpus node. Because of this I have introduced
brcm/soc.yaml schema with current broadcom SoCs and making this property
required as per Rob's v3 review comments.
Ingenic cpus have also its schema already mainlined. To unify things I
have also put this information in this mips/cpus.yaml schema and remove
the 'mips/ingenic/ingenic,cpu.yaml' schema. I have also added current
maintainer as maintainer for this 'mips/cpus.yaml' file.
Thomas, are these patches going through the mips git tree?
Thanks,
Sergio Paracuellos
Changes in v8:
- Remove Hauke Mehrtens from brcm/soc.yaml maintainers as per Hauke Mehrtens's
requested in v7 response.
Changes in v7:
- Remove Rafał Miłecki from brcm/soc.yaml maintainers as per Rafał Miłecki's
requested in v6 response.
Changes in v6:
- Avoid 'convert' in SoC's patch commit message since this is just an
addition and nothing is removed in this patch.
- Add Florian Fainelli to maintainers of Broadcom SoC bindings
- Add Florian's Acked-by for broadcom SoC PATCH.
- Collect Rob's Reviewed-by for both patches.
Changes in v5:
- Address Krzysztof comments in v4:
- change BMIPS SoC compatibles into an enum and drop descriptions,
- Add blank line.
- Redo commit message since it is not a conversion to schema.
- Drop 'device tree bindings' from description.
- Properly describe 'mips-hpt-frequency'.
- Review cpus node and add a sample to check schema correctness.
Changes in v4:
- Address Rob's v3 review comments:
* Drop PATCH introducing special brcm,cpus.yaml only because properyu
'mips-hpt-frequency' is required and move this property to brcm/soc.yaml
schema.
* Remove 'Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml'
and add that information to general mips/cpus.yaml schema.
* Define all properties in mips/cpus.yaml and set 'additionalProperties'
to false.
Changes in v3:
- cpus.yaml:
* address Krzysztof comment in v2:
* add Thomas as maintainer since this is architecture binding.
* s/cpu/CPU
* compatible goes first
* Add compatible 'mips,mips4Kc' as per Thomas request.
- Introduce two new schemas for Broadcom BMIPS:
* soc.yaml: describing the BRCM SoC's
* brcm,bmips-cpus.yaml: describing the cpu nodes for this platform.
Previous series:
v1: https://lore.kernel.org/all/CAMhs-H-eUTOHjAXAbywOXQJgc_j5Ex-1sB7eBZU_bWt1fpNVzA@xxxxxxxxxxxxxx/T/
v2: https://lore.kernel.org/all/20220918112245.GA5555@xxxxxxxxxxxxxxxx/T/
v3: https://lore.kernel.org/linux-devicetree/20220929072004.874795-1-sergio.paracuellos@xxxxxxxxx/T/#t
v4: https://lore.kernel.org/linux-devicetree/20221001043855.933528-1-sergio.paracuellos@xxxxxxxxx/T/#t
v5: https://lore.kernel.org/linux-devicetree/20221002091611.946210-1-sergio.paracuellos@xxxxxxxxx/T/#t
v6: https://lore.kernel.org/linux-devicetree/20221004050924.986211-1-sergio.paracuellos@xxxxxxxxx/T/#t
Sergio Paracuellos (2):
dt-bindings: mips: add CPU bindings for MIPS architecture
dt-bindings: mips: brcm: add Broadcom SoCs bindings
.../bindings/mips/brcm/brcm,bmips.txt | 8 --
.../devicetree/bindings/mips/brcm/soc.yaml | 97 +++++++++++++++
.../devicetree/bindings/mips/cpus.yaml | 115 ++++++++++++++++++
.../bindings/mips/ingenic/ingenic,cpu.yaml | 69 -----------
4 files changed, 212 insertions(+), 77 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mips/brcm/brcm,bmips.txt
create mode 100644 Documentation/devicetree/bindings/mips/brcm/soc.yaml
create mode 100644 Documentation/devicetree/bindings/mips/cpus.yaml
delete mode 100644 Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml
--
2.25.1
