On 03/10/2022 14:54, Parikshit Pareek wrote:
Change in v5:
- Moved the usb and ufs nodes from sa8540p-adp.dtsi file to respective
board specific dts files: sa8295p-adp.dts and sa8540p-adp-ride.dts.
Is there any benefit in this? USB0/2 and UFS (not UFS card) nodes are
identical
in the 2 files.
Konrad
Took inputs from Shazad Hussain in this regard(John)
- Added more description of the board differences(John)
- Not including Reviewed-by for Krzysztof, because of the new changes to
be reviewed.
- Removed Reported-by tag(John).
Changes in v4:
- Removed the ufs_card_hc node, as it is not mounted on Qdrive-3 board.
- Removed usb_1 relared nodes, as usb1 doesn't have any port connected on
Qdrive3 board.
- Added Reported-by tag for Shazad(for ufs and usb_1 node removals)
Changes in v3:
- Added Acked-by tag (Krzysztof)
- Renamed dtsi to sa8540p-adp.dtsi (John)
- Removed copyright from sa8295-adp.dts and sa8295-adp.dtsi(John)
- Added cover letter
change in v2:
- Make dt-binding patch as the first one in the patch set
- Add , after year 2022, in the license header
Initial version:
- Move the common nodes to sa8540p-adp.dtsi, and create qrive-3 board
specific file sa8540p-adp-ride.dts.
Parikshit Pareek (3):
dt-bindings: arm: qcom: Document additional sa8540p device
arm64: dts: qcom: sa8295p: move common nodes to dtsi
arm64: dts: qcom: introduce sa8540p-ride dts
.../devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 528 +++++-------------
arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts | 71 +++
.../{sa8295p-adp.dts => sa8540p-adp.dtsi} | 133 -----
5 files changed, 219 insertions(+), 515 deletions(-)
rewrite arch/arm64/boot/dts/qcom/sa8295p-adp.dts (70%)
create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts
copy arch/arm64/boot/dts/qcom/{sa8295p-adp.dts => sa8540p-adp.dtsi} (72%)
