On Tue, Sep 27, 2022 at 04:32:56PM +0530, Srinivas Neeli wrote:
> Versal watchdog driver uses window watchdog mode. Window watchdog
> timer(WWDT) contains closed(first) and open(second) window with
> 32 bit width. Write to the watchdog timer within predefined window
> periods of time. This means a period that is not too soon and a
> period that is not too late. The WWDT has to be restarted within
> the open window time. If software tries to restart WWDT outside of
> the open window time period, it generates a reset.
>
> Signed-off-by: Srinivas Neeli <srinivas.neeli@xxxxxxx>
> ---
> drivers/watchdog/Kconfig | 17 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/xilinx_wwdt.c | 286 +++++++++++++++++++++++++++++++++
> 3 files changed, 304 insertions(+)
> create mode 100644 drivers/watchdog/xilinx_wwdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 688922fc4edb..9822e471b9f0 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -304,6 +304,23 @@ config XILINX_WATCHDOG
> To compile this driver as a module, choose M here: the
> module will be called of_xilinx_wdt.
>
> +config XILINX_WINDOW_WATCHDOG
> + tristate "Xilinx window watchdog timer"
> + depends on HAS_IOMEM
> + select WATCHDOG_CORE
> + help
> + Window watchdog driver for the versal_wwdt ip core.
> + Window watchdog timer(WWDT) contains closed(first) and
> + open(second) window with 32 bit width. Write to the watchdog
> + timer within predefined window periods of time. This means
> + a period that is not too soon and a period that is not too
> + late. The WWDT has to be restarted within the open window time.
> + If software tries to restart WWDT outside of the open window
> + time period, it generates a reset.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called xilinx_wwdt.
> +
> config ZIIRAVE_WATCHDOG
> tristate "Zodiac RAVE Watchdog Timer"
> depends on I2C
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index cdeb119e6e61..4ff96c517407 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -155,6 +155,7 @@ obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
>
> # MicroBlaze Architecture
> obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o
> +obj-$(CONFIG_XILINX_WINDOW_WATCHDOG) += xilinx_wwdt.o
>
> # MIPS Architecture
> obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
> diff --git a/drivers/watchdog/xilinx_wwdt.c b/drivers/watchdog/xilinx_wwdt.c
> new file mode 100644
> index 000000000000..2594a01c2764
> --- /dev/null
> +++ b/drivers/watchdog/xilinx_wwdt.c
> @@ -0,0 +1,286 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Window watchdog device driver for Xilinx Versal WWDT
> + *
> + * Copyright (C) 2022, Advanced Micro Devices, Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/watchdog.h>
> +
> +#define XWWDT_DEFAULT_TIMEOUT 40
> +#define XWWDT_MIN_TIMEOUT 1
> +#define XWWDT_MAX_TIMEOUT 42
> +
> +/* Register offsets for the WWDT device */
> +#define XWWDT_MWR_OFFSET 0x00
> +#define XWWDT_ESR_OFFSET 0x04
> +#define XWWDT_FCR_OFFSET 0x08
> +#define XWWDT_FWR_OFFSET 0x0c
> +#define XWWDT_SWR_OFFSET 0x10
> +
> +/* Master Write Control Register Masks */
> +#define XWWDT_MWR_MASK BIT(0)
> +
> +/* Enable and Status Register Masks */
> +#define XWWDT_ESR_WINT_MASK BIT(16)
> +#define XWWDT_ESR_WSW_MASK BIT(8)
> +#define XWWDT_ESR_WEN_MASK BIT(0)
> +
> +#define XWWDT_PERCENT 50
> +
> +static int xwwdt_timeout;
> +static int xclosed_window_percent;
> +
> +module_param(xwwdt_timeout, int, 0644);
> +MODULE_PARM_DESC(xwwdt_timeout,
> + "Watchdog time in seconds. (default="
> + __MODULE_STRING(XWWDT_DEFAULT_TIMEOUT) ")");
There is no reason to make this writeable. There are means to set the
timeout in runtime. Those should be used.
> +module_param(xclosed_window_percent, int, 0644);
> +MODULE_PARM_DESC(xclosed_window_percent,
> + "Watchdog closed window percentage. (default="
> + __MODULE_STRING(XWWDT_PERCENT) ")");
The above is problematic. This should really not be set during runtime,
and the behavior is pretty much undefined if it is changed while the
watchdog is running. It should really be set using devicetree and not
be changed in the running system.
> +
> +/**
> + * struct xwwdt_device - Watchdog device structure
> + * @base: base io address of WDT device
> + * @spinlock: spinlock for IO register access
> + * @xilinx_wwdt_wdd: watchdog device structure
> + * @clk: struct clk * of a clock source
> + * @freq: source clock frequency of WWDT
> + */
> +struct xwwdt_device {
> + void __iomem *base;
> + spinlock_t spinlock; /* spinlock for register handling */
> + struct watchdog_device xilinx_wwdt_wdd;
> + struct clk *clk;
> + unsigned long freq;
> +};
> +
> +static bool is_wwdt_in_closed_window(struct watchdog_device *wdd)
> +{
> + struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> + u32 csr, ret;
> +
> + csr = ioread32(xdev->base + XWWDT_ESR_OFFSET);
> +
> + ret = (csr & XWWDT_ESR_WEN_MASK) ? !(csr & XWWDT_ESR_WSW_MASK) ? 0 : 1 : 1;
This is confusing.
return !(csr & XWWDT_ESR_WEN_MASK) || ((csr & XWWDT_ESR_WSW_MASK);
should do the same and would be easier to understand, though I am not sure if
it is correct (making the point that the expression is confusing).
> +
> + return ret;
> +}
> +
> +static int xilinx_wwdt_start(struct watchdog_device *wdd)
> +{
> + struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> + struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> + u64 time_out, closed_timeout, open_timeout;
> + u32 control_status_reg;
> +
> + /* Calculate timeout count */
> + time_out = xdev->freq * wdd->timeout;
> +
> + if (xclosed_window_percent) {
> + closed_timeout = (time_out * xclosed_window_percent) / 100;
> + open_timeout = time_out - closed_timeout;
> + wdd->min_hw_heartbeat_ms = xclosed_window_percent * 10 * wdd->timeout;
> + } else {
> + /* Calculate 50% of timeout */
Isn't that a bit random ?
> + time_out *= XWWDT_PERCENT;
> + time_out /= 100;
> + wdd->min_hw_heartbeat_ms = XWWDT_PERCENT * 10 * wdd->timeout;
min_hw_heartbeat_ms is supposed to be fixed after probe. Behavior of changing
it when starting the watchdog is undefined. This will likely fail under some
conditions.
> + }
> +
> + spin_lock(&xdev->spinlock);
> +
> + iowrite32(XWWDT_MWR_MASK, xdev->base + XWWDT_MWR_OFFSET);
> + iowrite32(~(u32)XWWDT_ESR_WEN_MASK, xdev->base + XWWDT_ESR_OFFSET);
> +
> + if (xclosed_window_percent) {
> + iowrite32((u32)closed_timeout, xdev->base + XWWDT_FWR_OFFSET);
> + iowrite32((u32)open_timeout, xdev->base + XWWDT_SWR_OFFSET);
> + } else {
> + /* Configure closed and open windows with 50% of timeout */
> + iowrite32((u32)time_out, xdev->base + XWWDT_FWR_OFFSET);
> + iowrite32((u32)time_out, xdev->base + XWWDT_SWR_OFFSET);
> + }
This if/else should not be necessary by using appropriate calculations
above. Anyway, this is moot - as said above, changing min_hw_heartbeat_ms
after probe is unexpected, and the code will have to be changed to use
a fixed value for the window size. With that, all calculations can and
should be done in the probe function.
> +
> + /* Enable the window watchdog timer */
> + control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
> + control_status_reg |= XWWDT_ESR_WEN_MASK;
> + iowrite32(control_status_reg, xdev->base + XWWDT_ESR_OFFSET);
Why is this enabled unconditionally ? I would assume that a user specifying
a 0-percentage window size doesn't want it enabled.
> +
> + spin_unlock(&xdev->spinlock);
> +
> + dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Started!\n");
> +
> + return 0;
> +}
> +
> +static int xilinx_wwdt_keepalive(struct watchdog_device *wdd)
> +{
> + struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> + u32 control_status_reg;
> +
> + spin_lock(&xdev->spinlock);
> +
> + /* Enable write access control bit for the window watchdog */
> + iowrite32(XWWDT_MWR_MASK, xdev->base + XWWDT_MWR_OFFSET);
> +
> + /* Trigger restart kick to watchdog */
> + control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
> + control_status_reg |= XWWDT_ESR_WSW_MASK;
> + iowrite32(control_status_reg, xdev->base + XWWDT_ESR_OFFSET);
> +
> + spin_unlock(&xdev->spinlock);
> +
> + return 0;
> +}
> +
> +static int xilinx_wwdt_set_timeout(struct watchdog_device *wdd,
> + unsigned int new_time)
> +{
> + struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> + struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> +
> + if (watchdog_active(xilinx_wwdt_wdd))
> + return -EPERM;
Why ? This will be the most common case and means to change the timeout.
> +
> + wdd->timeout = new_time;
> +
> + return 0;
> +}
> +
> +static int xilinx_wwdt_stop(struct watchdog_device *wdd)
> +{
> + struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> + struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> +
> + if (watchdog_active(xilinx_wwdt_wdd)) {
> + if (!is_wwdt_in_closed_window(wdd)) {
> + dev_warn(xilinx_wwdt_wdd->parent, "timer in closed window");
> + return -EPERM;
> + }
> + }
> +
> + spin_lock(&xdev->spinlock);
> +
> + iowrite32(XWWDT_MWR_MASK, xdev->base + XWWDT_MWR_OFFSET);
> +
> + /* Disable the Window watchdog timer */
> + iowrite32(~(u32)XWWDT_ESR_WEN_MASK, xdev->base + XWWDT_ESR_OFFSET);
> +
> + spin_unlock(&xdev->spinlock);
> +
> + clk_disable(xdev->clk);
This doesn't work. The start function doesn't enable the clock; it is
enabled in the probe function. If you want to enable the clock
dynamically, you'll have to enable it in the start function and make sure
that it is stopped when unloading the driver (you can't use the devm
function in this case). You'll also need to make sure that the unprepare
function is called when unloading the driver.
> +
> + dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Stopped!\n");
> +
> + return 0;
> +}
> +
> +static void xwwdt_clk_disable_unprepare(void *data)
> +{
> + clk_disable_unprepare(data);
> +}
> +
> +static const struct watchdog_info xilinx_wwdt_ident = {
> + .options = WDIOF_KEEPALIVEPING |
> + WDIOF_SETTIMEOUT,
> + .firmware_version = 1,
> + .identity = "xlnx_window watchdog",
> +};
> +
> +static const struct watchdog_ops xilinx_wwdt_ops = {
> + .owner = THIS_MODULE,
> + .start = xilinx_wwdt_start,
> + .stop = xilinx_wwdt_stop,
> + .set_timeout = xilinx_wwdt_set_timeout,
> + .ping = xilinx_wwdt_keepalive,
> +};
> +
> +static int xwwdt_probe(struct platform_device *pdev)
> +{
> + struct watchdog_device *xilinx_wwdt_wdd;
> + struct device *dev = &pdev->dev;
> + struct xwwdt_device *xdev;
> + int ret;
> +
> + xdev = devm_kzalloc(dev, sizeof(*xdev), GFP_KERNEL);
> + if (!xdev)
> + return -ENOMEM;
> +
> + xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> + xilinx_wwdt_wdd->info = &xilinx_wwdt_ident;
> + xilinx_wwdt_wdd->ops = &xilinx_wwdt_ops;
> + xilinx_wwdt_wdd->parent = dev;
> +
> + xdev->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(xdev->base))
> + return PTR_ERR(xdev->base);
> +
> + xdev->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(xdev->clk))
> + return PTR_ERR(xdev->clk);
> +
> + xdev->freq = clk_get_rate(xdev->clk);
> + if (!xdev->freq)
> + return -EINVAL;
> +
> + ret = clk_prepare_enable(xdev->clk);
> + if (ret) {
> + dev_err(dev, "unable to enable clock\n");
> + return ret;
> + }
> +
> + ret = devm_add_action_or_reset(dev, xwwdt_clk_disable_unprepare,
> + xdev->clk);
> + if (ret)
> + return ret;
> +
> + xilinx_wwdt_wdd->timeout = XWWDT_DEFAULT_TIMEOUT;
> + xilinx_wwdt_wdd->min_timeout = XWWDT_MIN_TIMEOUT;
> + xilinx_wwdt_wdd->max_timeout = XWWDT_MAX_TIMEOUT;
> +
> + ret = watchdog_init_timeout(xilinx_wwdt_wdd,
> + xwwdt_timeout, &pdev->dev);
> + if (ret)
> + dev_info(&pdev->dev, "Configured default timeout value\n");
> +
> + spin_lock_init(&xdev->spinlock);
> + watchdog_set_drvdata(xilinx_wwdt_wdd, xdev);
> +
> + ret = devm_watchdog_register_device(dev, xilinx_wwdt_wdd);
> + if (ret)
> + return ret;
> +
> + dev_info(dev, "Xilinx window watchdog Timer with timeout %ds\n",
> + xilinx_wwdt_wdd->timeout);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id xwwdt_of_match[] = {
> + { .compatible = "xlnx,versal-wwdt-1.0", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, xwwdt_of_match);
> +
> +static struct platform_driver xwwdt_driver = {
> + .probe = xwwdt_probe,
> + .driver = {
> + .name = "Xilinx window watchdog",
> + .of_match_table = xwwdt_of_match,
> + },
> +};
> +
> +module_platform_driver(xwwdt_driver);
> +
> +MODULE_AUTHOR("Neeli Srinivas <srinivas.neeli@xxxxxxx>");
> +MODULE_DESCRIPTION("Xilinx window watchdog driver");
> +MODULE_LICENSE("GPL");
