The 3.3V regulator is not part of the SoC, so pull it from the SoC
node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 65684da52e2e..5ff0d9a275cc 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -29,16 +29,13 @@ sdcc4_pwrseq: sdcc4_pwrseq {
};
};
- soc {
- /* on board fixed 3.3v supply */
- v3p3_fixed: v3p3 {
- compatible = "regulator-fixed";
- regulator-name = "PCIE V3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
+ /* on board fixed 3.3v supply */
+ v3p3_fixed: regulator-v3p3 {
+ compatible = "regulator-fixed";
+ regulator-name = "PCIE V3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
};
--
2.35.1
