On Thu, Sep 29, 2022 at 02:07:14PM PDT, Rob Herring wrote:
On Sun, Sep 25, 2022 at 03:03:18PM -0700, Zev Weiss wrote:
This describes a power output supplied by a regulator, such as a
power outlet on a power distribution unit (PDU).
Signed-off-by: Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
---
.../bindings/regulator/regulator-output.yaml | 47 +++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/regulator-output.yaml
diff --git a/Documentation/devicetree/bindings/regulator/regulator-output.yaml b/Documentation/devicetree/bindings/regulator/regulator-output.yaml
new file mode 100644
index 000000000000..40953ec48e9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator-output.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/regulator/regulator-output.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator output connector
+
+maintainers:
+ - Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
+
+description: |
+ This describes a power output connector supplied by a regulator,
+ such as a power outlet on a power distribution unit (PDU). The
+ connector may be standalone or merely one channel or set of pins
+ within a ganged physical connector carrying multiple independent
+ power outputs.
+
+properties:
+ compatible:
+ const: regulator-output
+
+ vout-supply:
+ description:
+ Phandle of the regulator supplying the output.
+
+ regulator-leave-on:
+ description: |
+ If the regulator is enabled when software relinquishes control
+ of it (such as when shutting down) it should be left enabled
+ instead of being turned off.
+ type: boolean
I'm not too sure about this one as there could be various times when
control is relinquished. It is userspace closing its access?
driver unbind? module unload? Does a bootloader pay attention to this?
Rob
Thanks for the feedback, Rob -- I'll admit I was a bit unsure how to
approach that, and this may well not be the right answer. What I'm
really aiming for is an appropriate way to express that regulator on/off
state should only ever be changed by explicit (external, e.g. userspace)
request, never as any sort of default/automatic action. The two obvious
things to guard against there seem to be automatic enablement during
initialization and automatic disablement on de-init (shutdown, unbind,
etc.). The former I think can be avoided by simply not setting
regulator-boot-on, so I added this as a corresponding property to avoid
the latter.
I'm definitely open to suggestions for a better approach though.
Thanks,
Zev
