This describes a power output supplied by a regulator, such as a power outlet on a power distribution unit (PDU). Signed-off-by: Zev Weiss <zev@xxxxxxxxxxxxxxxxx> --- .../bindings/regulator/regulator-output.yaml | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/regulator-output.yaml diff --git a/Documentation/devicetree/bindings/regulator/regulator-output.yaml b/Documentation/devicetree/bindings/regulator/regulator-output.yaml new file mode 100644 index 000000000000..40953ec48e9e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator-output.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/regulator/regulator-output.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator output connector + +maintainers: + - Zev Weiss <zev@xxxxxxxxxxxxxxxxx> + +description: | + This describes a power output connector supplied by a regulator, + such as a power outlet on a power distribution unit (PDU). The + connector may be standalone or merely one channel or set of pins + within a ganged physical connector carrying multiple independent + power outputs. + +properties: + compatible: + const: regulator-output + + vout-supply: + description: + Phandle of the regulator supplying the output. + + regulator-leave-on: + description: | + If the regulator is enabled when software relinquishes control + of it (such as when shutting down) it should be left enabled + instead of being turned off. + type: boolean + +required: + - compatible + - vout-supply + +additionalProperties: false + +examples: + - | + output { + compatible = "regulator-output"; + vout-supply = <&output_reg>; + regulator-leave-on; + }; -- 2.37.3
