On Wed, Sep 28, 2022 at 01:21:45PM +0200, Erling Ljunggren wrote: > Add devicetree bindings for new cat24c208 EDID EEPROM driver. > > Signed-off-by: Erling Ljunggren <hljunggr@xxxxxxxxx> > --- > .../bindings/media/i2c/onnn,cat24c208.yaml | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml > new file mode 100644 > index 000000000000..fcfaccb5e39f > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/onnn,cat24c208.yaml > @@ -0,0 +1,48 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/onnn,cat24c208.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ON Semiconductor CAT24C208 EDID EEPROM driver > + > +maintainers: > + - Hans Verkuil <hverkuil-cisco@xxxxxxxxx> > + > +description: | > + CAT24C208 is a dual port i2c EEPROM designed for EDID storage. > + > + > +properties: > + compatible: > + const: onnn,cat24c208 > + > + reg: > + maxItems: 1 > + > + hpd-gpios: > + maxItems: 1 > + description: > + References to the GPIO that controls the HDMI hot-plug detection pin. > + The active flag indicates the GPIO level that enables hot-plug detection. This node is supposed to represent a device, cat24c208, but that device I'm guessing knows nothing about HPD. That's a property of the connector and belongs in a connector node much like we have for the other side of display connections. It may seem like overkill, but it frequently evolves such that not having a connector node becomes a problem. See 'hdmi-connector' binding for example. Rob
