Add a link to LCC's PLL4 clock to the GCC device node following the
bindings (and driver needs).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 90c08b51680a..a79f8b5fe12d 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -513,8 +513,8 @@ mux {
gcc: clock-controller@900000 {
compatible = "qcom,gcc-ipq8064", "syscon";
- clocks = <&pxo_board>, <&cxo_board>;
- clock-names = "pxo", "cxo";
+ clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
+ clock-names = "pxo", "cxo", "pll4";
reg = <0x00900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
--
2.35.1
