> This patch series converts atmel-flexcom bindings into json-schema format. > Adds support for lan966x flexcom chip-select configurations and its > DT bindings. > > v8 -> v9: > - Use full schema path for i2c bindings. > Hi Rob & Krzysztof, Please let me know your comments on v9 patch series. Thanks, Kavya > v7 -> v8: > - Added back patternProperties for child nodes. > - Changed compatible string to microchip,lan9668-flexcom. > > v6 -> v7: > - Change filename to atmel,sama5d2-flexcom.yaml > - Add #address-cells, #size-cells to flexcom node - Fixed warnings. > > v5 -> v6: > - Removed spi node from example as suggested by Rob and > also pattern properties(spi dt-bindings conversion to yaml patch is under > review). > https://patchwork.kernel.org/project/linux-arm- > kernel/patch/20220629125804.137099-1-sergiu.moga@xxxxxxxxxxxxx/ > Once this is accepted, I will add back spi example through new patch. > > v4 -> v5: > - Fix indentations of DT example. > - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then > "reg" property as it is not required. > > v3 -> v4: > - Fix dtschema errors. > - Add a condition to flexcom chip-selects configuration as chip-select > lines are optional. > > v2 -> v3: > - changed IRQ flag in dt-bindings example. > - added reg property specific to lan66x which is missed in v2. > - used goto label for clk_disable in error cases. > > v1 -> v2: > - minor fix in title of dt-bindings. > - Modified new dt properties usage in atmel,flexcom.yaml. > - Used GENMASK and macros for maximum allowed values. > - Use u32 values for flexcom chipselects instead of strings. > - disable clock in case of errors. > > Kavyasree Kotagiri (3): > dt-bindings: mfd: Convert atmel-flexcom to json-schema > dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for > lan966x > mfd: atmel-flexcom: Add support for lan966x flexcom chip-select > configuration > > .../bindings/mfd/atmel,sama5d2-flexcom.yaml | 155 ++++++++++++++++++ > .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------- > drivers/mfd/atmel-flexcom.c | 94 ++++++++++- > 3 files changed, 248 insertions(+), 64 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml > delete mode 100644 Documentation/devicetree/bindings/mfd/atmel- > flexcom.txt > > -- > 2.25.1
