For "Quartz64 Model A" add missing RTS line to the UART interface used by
bluetooth and swap bluetooth host-wakeup and device-wakeup gpio pins to
match the boards physical layout. This changes are necessary to make
bluetooth provided by the wireless module work.
Signed-off-by: Lev Popov <leo@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index a05460b92415..91908081c5ed 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -740,7 +740,7 @@ &uart0 {
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
status = "okay";
uart-has-rtscts;
@@ -748,8 +748,8 @@ bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk817 1>;
clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
--
2.37.3
