DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. qcom/sc8280xp-crd.dtb: pinctrl@f100000: kybd-default-state: 'oneOf' conditional failed, one must be fixed: 'pins' is a required property 'function' is a required property 'disable', 'int-n', 'reset' do not match any of the regexes: 'pinctrl-[0-9]+' 'disable', 'int-n', 'reset' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 12 ++++++------ .../boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index fea7d8273ccd..a2027f1d1d04 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -374,19 +374,19 @@ &tlmm { gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; kybd_default: kybd-default-state { - disable { + disable-pins { pins = "gpio102"; function = "gpio"; output-low; }; - int-n { + int-n-pins { pins = "gpio104"; function = "gpio"; bias-disable; }; - reset { + reset-pins { pins = "gpio105"; function = "gpio"; bias-disable; @@ -410,7 +410,7 @@ qup2_i2c5_default: qup2-i2c5-default-state { }; tpad_default: tpad-default-state { - int-n { + int-n-pins { pins = "gpio182"; function = "gpio"; bias-disable; @@ -418,13 +418,13 @@ int-n { }; ts0_default: ts0-default-state { - int-n { + int-n-pins { pins = "gpio175"; function = "gpio"; bias-disable; }; - reset-n { + reset-n-pins { pins = "gpio99"; function = "gpio"; output-high; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index b2b744bb8a53..68b61e8d03c0 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -350,19 +350,19 @@ &tlmm { gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; kybd_default: kybd-default-state { - disable { + disable-pins { pins = "gpio102"; function = "gpio"; output-low; }; - int-n { + int-n-pins { pins = "gpio104"; function = "gpio"; bias-disable; }; - reset { + reset-pins { pins = "gpio105"; function = "gpio"; bias-disable; @@ -384,7 +384,7 @@ qup2_i2c5_default: qup2-i2c5-default-state { }; tpad_default: tpad-default-state { - int-n { + int-n-pins { pins = "gpio182"; function = "gpio"; bias-disable; @@ -392,13 +392,13 @@ int-n { }; ts0_default: ts0-default-state { - int-n { + int-n-pins { pins = "gpio175"; function = "gpio"; bias-disable; }; - reset-n { + reset-n-pins { pins = "gpio99"; function = "gpio"; output-high; -- 2.34.1