Move properties common to all DPU DT nodes to the dpu-common.yaml. Note, this removes description of individual DPU port@ nodes. However such definitions add no additional value. The reg values do not correspond to hardware INTF indices. The driver discovers and binds these ports not paying any care for the order of these items. Thus just leave the reference to graph.yaml#/properties/ports and the description. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- .../bindings/display/msm/dpu-common.yaml | 52 +++++++++++++++++++ .../bindings/display/msm/dpu-msm8998.yaml | 44 +--------------- .../bindings/display/msm/dpu-qcm2290.yaml | 39 +------------- .../bindings/display/msm/dpu-sc7180.yaml | 43 +-------------- .../bindings/display/msm/dpu-sc7280.yaml | 43 +-------------- .../bindings/display/msm/dpu-sdm845.yaml | 44 +--------------- 6 files changed, 62 insertions(+), 203 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-common.yaml diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml new file mode 100644 index 000000000000..8ffbc30c6b7f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml @@ -0,0 +1,52 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU common properties + +maintainers: + - Krishna Manikandan <quic_mkrishn@xxxxxxxxxxx> + - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> + - Rob Clark <robdclark@xxxxxxxxx> + +description: | + Common properties for QCom DPU display controller. + +properties: + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. + + patternProperties: + "^port@[0-9a-f]+$": + $ref: /schemas/graph.yaml#/properties/port + + # at least one port is required + required: + - port@0 + +required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml index 253665c693e6..200eeace1c71 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -61,8 +61,9 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + $ref: /schemas/display/msm/dpu-common.yaml# description: Node containing the properties of DPU. - additionalProperties: false + unevaluatedProperties: false properties: compatible: @@ -99,47 +100,6 @@ patternProperties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml index c5824e1d2382..d5f1d16b13d3 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml @@ -73,8 +73,9 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + $ref: /schemas/display/msm/dpu-common.yaml# description: Node containing the properties of DPU. - additionalProperties: false + unevaluatedProperties: false properties: compatible: @@ -107,42 +108,6 @@ patternProperties: - const: lut - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index 4890bc25f3fd..2ac10664d79a 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -72,8 +72,9 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + $ref: /schemas/display/msm/dpu-common.yaml# description: Node containing the properties of DPU. - additionalProperties: false + unevaluatedProperties: false properties: compatible: @@ -108,46 +109,6 @@ patternProperties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@2: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF0 (DP) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index 584d646021d5..4ca7bc7f0185 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -71,8 +71,9 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + $ref: /schemas/display/msm/dpu-common.yaml# description: Node containing the properties of DPU. - additionalProperties: false + unevaluatedProperties: false properties: compatible: @@ -106,46 +107,6 @@ patternProperties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF5 (EDP) - - required: - - port@0 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index a87deea8e9bc..de193ca11265 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -74,8 +74,9 @@ properties: patternProperties: "^display-controller@[0-9a-f]+$": type: object + $ref: /schemas/display/msm/dpu-common.yaml# description: Node containing the properties of DPU. - additionalProperties: false + unevaluatedProperties: false properties: compatible: @@ -108,47 +109,6 @@ patternProperties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - opp-table: - type: object - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF1 (DSI1) - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: DPU_INTF2 (DSI2) - - required: - - port@0 - - port@1 - - required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - required: - compatible - reg -- 2.35.1
