Re: [PATCH 2/3] arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/09/2022 12:12, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
> 
> The PX30-uQ7 (Ringneck) SoM is a µQseven-compatible (40mmx70mm, MXM-230
> connector) system-on-module from Theobroma Systems[1], featuring the
> Rockchip PX30.
> 
> It provides the following feature set:
>  * up to 4GB DDR4
>  * up to 128GB on-module eMMC (with 8-bit 1.8V interface)
>  * SD card (on a baseboard) via edge connector
>  * Fast Ethernet with on-module TI DP83825I PHY
>  * MIPI-DSI/LVDS
>  * MIPI-CSI
>  * USB
>    - 1x USB 2.0 dual-role
>    - 3x USB 2.0 host
>  * on-module STM32 Cortex-M0 companion controller, implementing:
>    - low-power RTC functionality (ISL1208 emulation)
>    - fan controller (AMC6821 emulation)
>    - USB<->CAN bridge controller
>  * on-module Espressif ESP32 for Bluetooth + 2.4GHz WiFi
>  * on-module NXP SE05x Secure Element
> 
> [1] https://www.theobroma-systems.com/som-product/px30-%C2%B5q7/
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../dts/rockchip/px30-ringneck-haikou.dts     | 239 ++++++++++++
>  .../boot/dts/rockchip/px30-ringneck.dtsi      | 347 ++++++++++++++++++
>  3 files changed, 587 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
>  create mode 100644 arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index ef79a672804a..1e3b9d7c1a8b 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
> new file mode 100644
> index 000000000000..6304d6f7baa3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
> @@ -0,0 +1,239 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
> + */
> +
> +/dts-v1/;
> +#include "px30-ringneck.dtsi"
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +	model = "Theobroma Systems PX30-µQ7 SoM on Haikou devkit";
> +	compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
> +
> +	aliases {
> +		mmc2 = &sdmmc;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	gpio_keys: haikou-keys {

By convention node name is gpio-keys

> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-0 = <&haikou_keys_pin>;
> +		pinctrl-names = "default";
> +
> +		BATLOWn {

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

Missing generic node name, only lowercase characters.

> +			label = "BATLOW#";
> +			linux,code = <KEY_BATTERY>;
> +			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		BIOS_DISABLEn {
> +			label = "BIOS_DISABLE#";
> +			linux,code = <SW_BOOT_ALT>;
> +			linux,input-type = <EV_SW>;
> +			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		LID_BTNn {
> +			label = "LID_BTN#";
> +			linux,code = <SW_LID>;
> +			linux,input-type = <EV_SW>;
> +			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		SLP_BTNn {
> +			label = "SLP_BTN#";
> +			linux,code = <KEY_SLEEP>;
> +			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		WAKEn {
> +			label = "WAKE#";
> +			linux,code = <KEY_WAKEUP>;
> +			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	leds {
> +		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
> +
> +		sd_card_led: led-1 {
> +			label = "sd_card_led";
> +			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "mmc2";
> +		};
> +	};
> +
> +	i2s0-sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,name = "Haikou,I2S-codec";
> +		simple-audio-card,mclk-fs = <512>;
> +
> +		simple-audio-card,codec {
> +			clocks = <&sgtl5000_clk>;
> +			sound-dai = <&sgtl5000>;
> +		};
> +
> +		simple-audio-card,cpu {
> +			bitclock-master;
> +			frame-master;
> +			sound-dai = <&i2s0_8ch>;
> +		};
> +	};
> +
> +	sgtl5000_clk: sgtl5000-oscillator {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency  = <24576000>;
> +	};
> +
> +	dc_12v: dc-12v {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

So at least generic ("regulator") prefix or suffix.

> +		compatible = "regulator-fixed";
> +		regulator-name = "dc_12v";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +	};
> +
> +	vcc3v3_baseboard: vcc3v3-baseboard {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_baseboard";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&dc_12v>;
> +	};
> +
> +	vcc5v0_baseboard: vcc5v0-baseboard {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_baseboard";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&dc_12v>;
> +	};
> +
> +	vdda_codec: vdda-codec {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdda_codec";
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc5v0_baseboard>;
> +	};
> +
> +	vddd_codec: vddd-codec {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vddd_codec";
> +		regulator-boot-on;
> +		regulator-min-microvolt = <1600000>;
> +		regulator-max-microvolt = <1600000>;
> +		vin-supply = <&vcc5v0_baseboard>;
> +	};
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	sgtl5000: codec@a {
> +		compatible = "fsl,sgtl5000";
> +		reg = <0x0a>;
> +		clocks = <&sgtl5000_clk>;
> +		#sound-dai-cells = <0>;
> +		VDDA-supply = <&vdda_codec>;
> +		VDDIO-supply = <&vcc3v3_baseboard>;
> +		VDDD-supply = <&vddd_codec>;
> +		status = "okay";

Okay is by default.

> +	};
> +};
> +
> +&i2c3 {
> +	status = "okay";
> +
> +	eeprom@50 {
> +		reg = <0x50>;
> +		compatible = "atmel,24c01";
> +		pagesize = <8>;
> +		size = <128>;
> +		vcc-supply = <&vcc3v3_baseboard>;
> +	};
> +};
> +
> +&i2s0_8ch {
> +	status = "okay";
> +};
> +
> +&gmac {
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	haikou {
> +		haikou_keys_pin: haikou-keys-pin {
> +			rockchip,pins =
> +			  /* WAKE# */
> +			  <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
> +			  /* SLP_BTN# */
> +			  <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
> +			  /* LID_BTN */
> +			  <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
> +			  /* BATLOW# */
> +			  <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
> +			  /* BIOS_DISABLE# */
> +			  <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +
> +	leds {
> +		sd_card_led_pin: sd-card-led-pin {
> +			rockchip,pins =
> +			  <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
> +
> +&pwm0 {
> +	status = "okay";
> +};
> +
> +&sdmmc {
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
> +	disable-wp;
> +	vmmc-supply = <&vcc3v3_baseboard>;
> +	status = "okay";
> +};
> +
> +&spi1 {
> +	status = "okay";
> +};
> +
> +&u2phy_otg {
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart5 {
> +	pinctrl-0 = <&uart5_xfer>;
> +	status = "okay";
> +};
> +
> +&usb20_otg {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
> new file mode 100644
> index 000000000000..74a7f1182c21
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
> @@ -0,0 +1,347 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
> + */
> +
> +/dts-v1/;
> +#include "px30.dtsi"
> +
> +/ {
> +	aliases {
> +		mmc0 = &emmc;
> +		mmc1 = &sdio;
> +		rtc0 = &rtc_twi;
> +		rtc1 = &rk809;
> +	};
> +
> +	emmc_pwrseq: emmc-pwrseq {
> +		compatible = "mmc-pwrseq-emmc";
> +		pinctrl-0 = <&emmc_reset>;
> +		pinctrl-names = "default";
> +		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";

This belongs to DTSI.

> +		pinctrl-names = "default";
> +		pinctrl-0 = <&module_led_pin>;
> +		status = "okay";

No need.

> +
> +		module_led: led-0 {

Why DTSI - which in logic comes first - starts with 1 and this is 0?\

> +			label = "module_led";
> +			gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	vcc5v0_sys: vccsys {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu1 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu2 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu3 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&emmc {
> +	bus-width = <8>;
> +	cap-mmc-highspeed;
> +	mmc-hs200-1_8v;
> +	supports-emmc;
> +	mmc-pwrseq = <&emmc_pwrseq>;
> +	non-removable;
> +	vmmc-supply = <&vcc_3v3>;
> +	vqmmc-supply = <&vcc_emmc>;
> +
> +	status = "okay";
> +};
> +
> +/* On-module TI DP83825I PHY but no connector, enable in carrierboard */
> +&gmac {
> +	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
> +	snps,reset-active-low;
> +	snps,reset-delays-us = <0 50000 50000>;
> +	phy-supply = <&vcc_3v3>;
> +	clock_in_out = "output";
> +};
> +
> +&gpu {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +
> +	rk809: pmic@20 {
> +		compatible = "rockchip,rk809";
> +		reg = <0x20>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-0 = <&pmic_int>;
> +		pinctrl-names = "default";
> +		#clock-cells = <0>;
> +		clock-output-names = "xin32k";
> +		rockchip,system-power-controller;
> +		wakeup-source;
> +		status = "okay";

No need.

> +
> +		vcc1-supply = <&vcc5v0_sys>;
> +		vcc2-supply = <&vcc5v0_sys>;
> +		vcc3-supply = <&vcc5v0_sys>;
> +		vcc4-supply = <&vcc5v0_sys>;
> +		vcc5-supply = <&vcc_3v3>;
> +		vcc6-supply = <&vcc_3v3>;
> +		vcc7-supply = <&vcc_3v3>;
> +		vcc9-supply = <&vcc5v0_sys>;
> +

(...)

> +&pinctrl {
> +	emmc {
> +		emmc_reset: emmc-reset {
> +			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	leds {
> +		module_led_pin: module-led-pin {
> +			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	pmic {
> +		pmic_int: pmic_int {

No underscores in node names.

> +			rockchip,pins =
> +				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +
> +

Skip unneeded blank lines.

> +};
> +
> +&tsadc {
> +	status = "okay";
> +};
> +
> +&u2phy {
> +	status = "okay";
> +};
> +
> +&u2phy_host {
> +	status = "okay";
> +};
> +
> +/* Mule UCAN */
> +&usb_host0_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host0_ohci {
> +	status = "okay";
> +};
> +
> +&wdt {
> +	status = "okay";
> +};

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux