This patch series is based on next-20220915. Add minimal support for R-Car S4-8 Etherent Switch. This hardware supports a lot of features. But, this driver only supports it as act as an ethernet controller for now. Changes from v2: https://lore.kernel.org/all/20220921084745.3355107-1-yoshihiro.shimoda.uh@xxxxxxxxxxx/ - Separate patcheas into each subsystem. - Add spin lock protection for multiple registers access in patch [3/3]. Yoshihiro Shimoda (3): dt-bindings: net: renesas: Document Renesas Ethernet Switch net: ethernet: renesas: Add Ethernet Switch driver net: ethernet: renesas: rswitch: Add R-Car Gen4 gPTP support .../bindings/net/renesas,etherswitch.yaml | 286 +++ drivers/net/ethernet/renesas/Kconfig | 11 + drivers/net/ethernet/renesas/Makefile | 4 + drivers/net/ethernet/renesas/rcar_gen4_ptp.c | 181 ++ drivers/net/ethernet/renesas/rcar_gen4_ptp.h | 72 + drivers/net/ethernet/renesas/rswitch.c | 1779 +++++++++++++++++ drivers/net/ethernet/renesas/rswitch.h | 967 +++++++++ 7 files changed, 3300 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/renesas,etherswitch.yaml create mode 100644 drivers/net/ethernet/renesas/rcar_gen4_ptp.c create mode 100644 drivers/net/ethernet/renesas/rcar_gen4_ptp.h create mode 100644 drivers/net/ethernet/renesas/rswitch.c create mode 100644 drivers/net/ethernet/renesas/rswitch.h -- 2.25.1
