[PATCH v4 1/4] remoteproc: qcom: qcom_wcnss: Add support for pronto-v3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>

Pronto-v3 is similar to pronto-v2. It requires two power domains, and it
requires the xo clock. It is used on the MSM8953 platform.

Signed-off-by: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
Signed-off-by: Sireesh Kodali <sireeshkodali1@xxxxxxxxx>
---
 drivers/remoteproc/qcom_wcnss.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 68f37296b151..ff18bfae5eb6 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -141,6 +141,18 @@ static const struct wcnss_data pronto_v2_data = {
 	.num_vregs = 1,
 };
 
+static const struct wcnss_data pronto_v3_data = {
+	.pmu_offset = 0x1004,
+	.spare_offset = 0x1088,
+
+	.pd_names = { "mx", "cx" },
+	.vregs = (struct wcnss_vreg_info[]) {
+		{ "vddpx", 1800000, 1800000, 0 },
+	},
+	.num_pd_vregs = 2,
+	.num_vregs = 1,
+};
+
 static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
@@ -675,6 +687,7 @@ static const struct of_device_id wcnss_of_match[] = {
 	{ .compatible = "qcom,riva-pil", &riva_data },
 	{ .compatible = "qcom,pronto-v1-pil", &pronto_v1_data },
 	{ .compatible = "qcom,pronto-v2-pil", &pronto_v2_data },
+	{ .compatible = "qcom,pronto-v3-pil", &pronto_v3_data },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, wcnss_of_match);
-- 
2.37.3




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux