From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx> Add an optional DMA property 'xlnx,axistream-connected'. This can be specified to indicate that DMA is connected to a streaming IP in the hardware design and dma driver needs to do some additional handling i.e pass metadata and perform streaming IP specific configuration. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Sarath Babu Naidu Gaddam <sarath.babu.naidu.gaddam@xxxxxxx> --- Changes in V3: - Add Rob acked-by. Changes in V2: - Rename xlnx,axieth-connected to xlnx,axistream-connected to make it generic. --- Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt index d1700a5c36bf..18445aa092ab 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt @@ -49,6 +49,8 @@ Optional properties for AXI DMA and MCDMA: register as configured in h/w. Takes values {8...26}. If the property is missing or invalid then the default value 23 is used. This is the maximum value that is supported by all IP versions. +- xlnx,axistream-connected: Tells whether DMA is connected to AXI stream IP. + Optional properties for VDMA: - xlnx,flush-fsync: Tells which channel to Flush on Frame sync. It takes following values: -- 2.25.1