Le 15 oct. 2014 à 16:41, Andrew Lunn <andrew@xxxxxxx> a écrit : >>> All the 3 branch works WHEN APPLYING A0 patch (below), with both my custom kernel config and the arch/arm/configs/mvebu_v7_defconfig >> Just one thing though, one of my cron behavior change with 3.17, when I use the cmd "/sbin/hwclock --adjust -f /dev/rtc1" I get this new error I never had before: >> "hwclock: select() to /dev/rtc1 to wait for clock tick timed out: Success" >> >> where rtc1 if the i2c rtc connected to the i2C bus, can this be related to the i2c patch that would slow down i2c operation or somthing ? > > Hi Benoit > > It won't fix your problem, but if the built in RTC is not usable, it > would be good to disable it in the .dts file. The i2c RTC will then > become RTC0. > > > The actual "error" message is odd: > "hwclock: select() to /dev/rtc1 to wait for clock tick timed out: Success" > Yes this is the wired thing is that everything works, even getting the date via "cat /sys/class/i2c-adapter/i2c-0/0-0051/rtc/rtc1/time" is ok reading the rtc driver code it seems this message is shown when multiple resources try to access shared rtc... but why now and not before ? So I was wondering if the i2c_quirk() applied by the batch has any effect with this ? Anyhow I'll handle the message for now and see if there are performance impact on this... Benoit > Success means it actually worked, not an error. Does the RTC contain > the correct time afterwards? > > Andrew -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
