Le 6 oct. 2014 à 18:13, Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> a écrit : > On 10/06/2014 01:11 AM, Benoit Masson wrote: >> Le 3 oct. 2014 à 17:41, Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> a écrit : >>> On 10/03/2014 05:29 PM, Benoit Masson wrote: >>>> Le 3 oct. 2014 à 17:06, Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> a écrit : >>>>> On 10/03/2014 04:11 PM, Jason Cooper wrote: >>>>>> On Sun, Sep 21, 2014 at 04:11:23PM +0200, Benoit Masson wrote: >>>>>>>> Le 19 sept. 2014 à 22:14, Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> a écrit : >>> [...] >>>>>>>> Patches are based on v3.17-rc1 and intended for v3.18 but I am not in >>>>>>>> a hurry. I only compile tested this, so a formal Tested-by from Benoit >>>>>>>> for the ix4 and any other Armada XP board would be great. >>>>>>> >>>>>>> I'm not sure what to test since I only receive some patch from the >>>>>>> series of 8. Should I get all 8 or only those you sent me. I'll be >>>>>>> able to test during next week. >>>>>> >>>>>> Did you ever get a chance to test this series? >>>>> >>>>> Uhm, I never prepared a branch for Benoit to test. I have pushed the >>>>> patches with Thomas Acked-by's and renamed eeprom node based on >>>>> v3.17-rc1 to >>>>> >>>>> https://github.com/shesselba/linux-dove.git devel/mvebu-ix4 >>>>> >>> [...] >> Maybe I missed something ? is this branch you sent me a bare fork >> from mainline 3.17 ? does it includes the armada XP step A0 patch ? > > Benoit, > Hi, > I prepared more branches with the series > - on top of v3.17 release: > https://github.com/shesselba/linux-dove.git devel/mvebu-ix4_v3.17 > > - on top of next-20141003 (i.e. what will become v3.18-rc1): > https://github.com/shesselba/linux-dove.git devel/mvebu-ix4_next-20141003 > > It would be great, if you can test in this order: > - vanilla v3.17 > - mvebu-ix4_v3.17 > - mvebu-ix4_next-20141003 > All the 3 branch works WHEN APPLYING A0 patch (below), with both my custom kernel config and the arch/arm/configs/mvebu_v7_defconfig The reason why it didn't worked last time was that apparently the A0 patch (copied) below was not merged into 3.17 :( This means that ix4-300d support is broken on 3.17 because of the A0 stepping patch not merged. patch (from Andrew Lunn Acked-by Gregory Clement is missing: --- arch/arm/mach-mvebu/board-v7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index b2524d6..b1e148d 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -174,7 +174,7 @@ static void __init thermal_quirk(void) static void __init mvebu_dt_init(void) { - if (of_machine_is_compatible("plathome,openblocks-ax3-4")) + if (of_machine_is_compatible("marvell,armadaxp")) i2c_quirk(); if (of_machine_is_compatible("marvell,a375-db")) { external_abort_quirk(); -- 1.9.1 > If any branch fails, you can stop and please report back. > > I also have the ix4 but I need more time for a full setup like you > already seem to have ready. Again, there is no hurry, take your time. > > Thanks! > > Sebastian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
