This patchset contains initial support for Broadcom's Cygnus SoC based on our iProc architecture. Initial support is minimal and includes just the mach platform code, clock driver, and a basic device tree configuration. Peripheral drivers will be submitted soon, as will device tree configurations for other Cygnus board variants. Changes from v4: - simple clock tree used. reworked clock driver will be submitted later - fixed MAINTAINERS patchset error - removed DEBUG_UART_8250 Kconfig.debug legacy support - made ARCH_BCM_IPROC a silent Kconfig option - removed multi_v7_defconfig as it is not needed at this time, can support in future patchset but does not seem optimal configs for our current usage. Changes from v3: - restart functionality removed. Will be added in a different patchset in drivers/power - removed NEON init sequence. Will be moved to bootloader - cleaned up Kconfigs for ARCH_BCM_CYGNUS by removing unnecessary selects - consolidated ARCH_BCM_IPROC with select from ARCH_BCM_CYGNUS and ARCH_BCM5301X - removed bcm911360_entphn binding - added documentation for SoCs currently supported in Cygnus family Changes from v2: - rebased to 3.17 kernel Changes from v1: - Address code review comments as per previous responses. - Copyright headers updated to remove Broadcom URL. - mach platform code still contains hard coded addresses. These address are the same for all Cygnus variants. Could you please provide guidance on where they should go if you would still like them changed. There does not seem to be a reason to change them to device tree as they do not change. Jonathan Richardson (3): ARM: cygnus: Initial support for Broadcom Cygnus SoC dt-bindings: Document Broadcom Cygnus SoC and clocks ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden (3): ARM: dts: Enable Broadcom Cygnus SoC MAINTAINERS: Entry for Cygnus/iproc arm architecture ARM: mach-bcm: Consolidate currently supported IPROC SoCs .../devicetree/bindings/arm/bcm/cygnus.txt | 31 +++ .../devicetree/bindings/clock/bcm-cygnus-clock.txt | 34 +++ MAINTAINERS | 15 ++ arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/bcm-cygnus-clock.dtsi | 73 ++++++ arch/arm/boot/dts/bcm-cygnus.dtsi | 109 +++++++++ arch/arm/boot/dts/bcm911360_entphn.dts | 22 ++ arch/arm/boot/dts/bcm911360k.dts | 22 ++ arch/arm/boot/dts/bcm958300k.dts | 22 ++ arch/arm/configs/bcm_cygnus_defconfig | 243 ++++++++++++++++++++ arch/arm/mach-bcm/Kconfig | 67 ++++-- arch/arm/mach-bcm/Makefile | 3 + arch/arm/mach-bcm/bcm_cygnus.c | 26 +++ 13 files changed, 650 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/cygnus.txt create mode 100644 Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt create mode 100644 arch/arm/boot/dts/bcm-cygnus-clock.dtsi create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts create mode 100644 arch/arm/boot/dts/bcm911360k.dts create mode 100644 arch/arm/boot/dts/bcm958300k.dts create mode 100644 arch/arm/configs/bcm_cygnus_defconfig create mode 100644 arch/arm/mach-bcm/bcm_cygnus.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
