The InnoComm WB15-EVK [1] board is a Eval base board for the WB15 SoM [2] which is based on the NXP i.MX8MM. This series adds InnoComm as a vendor prefix and the necessary dts/dtsi files. [1] https://www.innocomm.com/product_inner.aspx?num=2233 [2] https://www.innocomm.com/product_inner.aspx?num=2232 Changes since v2: - Fix another remaining s/innocom/innocomm/ - Don't use underscores in node names - Use IRQ_TYPE_LEVEL_LOW to specify interrupt polarity Changes since v1: - Fix spelling of InnoComm: s/innocom/innocomm/ s/Innocom/InnoComm/ Sascha Hauer (3): dt-bindings: vendor-prefixes: Add prefix for InnoComm dt-bindings: arm: fsl: Add InnoComm WB15 EVK arm64: dts: freescale: Add InnoComm i.MX8MM based WB15 SoM and EVK .../devicetree/bindings/arm/fsl.yaml | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../freescale/imx8mm-innocomm-wb15-evk.dts | 147 ++++++ .../dts/freescale/imx8mm-innocomm-wb15.dtsi | 480 ++++++++++++++++++ 5 files changed, 631 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi -- 2.30.2
