Convert the mtk-gce mailbox binding to DT schema format. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> --- Changes in v3: - Removed '|' from description - Removed mbox client examples - Squashed patch dt-bindings: arm: mediatek: mmsys: Reference to mediatek,gce-mailbox.yaml Changes in v2: - Changed mtk-gce.txt references to new yaml file A previous attempt for this was made at [1], but it was changing the way of getting clocks (by name for all). Keeping clock-names not required for the multi-gce case makes this binding simpler, hence I chose to abandon the change at [1] and go for this one instead. Any Reviewed-by or Acked-by tag was dropped, as this conversion was completely redone from scratch and differs from [1] for the aforementioned reasons. [1]: https://lore.kernel.org/all/20220524151512.247435-1-angelogioacchino.delregno@xxxxxxxxxxxxx/ .../bindings/arm/mediatek/mediatek,mmsys.yaml | 3 +- .../mailbox/mediatek,gce-mailbox.yaml | 80 ++++++++++++++++++ .../devicetree/bindings/mailbox/mtk-gce.txt | 82 ------------------- 3 files changed, 82 insertions(+), 83 deletions(-) create mode 100644 Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml delete mode 100644 Documentation/devicetree/bindings/mailbox/mtk-gce.txt diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml index 6ad023eec193..85e6f4f621fc 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml @@ -52,7 +52,8 @@ properties: description: Using mailbox to communicate with GCE, it should have this property and list of phandle, mailbox specifiers. See - Documentation/devicetree/bindings/mailbox/mtk-gce.txt for details. + Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml + for details. $ref: /schemas/types.yaml#/definitions/phandle-array mediatek,gce-client-reg: diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml new file mode 100644 index 000000000000..fff8fd2e984a --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/mediatek,gce-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Global Command Engine Mailbox + +maintainers: + - Houlong Wei <houlong.wei@xxxxxxxxxxxx> + +description: + The Global Command Engine (GCE) is used to help read/write registers with + critical time limitation, such as updating display configuration during the + vblank. The GCE can be used to implement the Command Queue (CMDQ) driver. + +properties: + compatible: + enum: + - mediatek,mt6779-gce + - mediatek,mt8173-gce + - mediatek,mt8183-gce + - mediatek,mt8186-gce + - mediatek,mt8192-gce + - mediatek,mt8195-gce + + "#mbox-cells": + const: 2 + description: + The first cell describes the Thread ID of the GCE, + the second cell describes the priority of the GCE thread + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Global Command Engine clock + + clock-names: + items: + - const: gce + +required: + - compatible + - "#mbox-cells" + - reg + - interrupts + - clocks + +if: + not: + properties: + compatible: + contains: + const: mediatek,mt8195-gce +then: + required: + - clock-names + +additionalProperties: false + +examples: + # Example for a device client and for a MediaTek mutex client + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gce: mailbox@12120000 { + compatible = "mediatek,mt8173-gce"; + reg = <0x10816000 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; + #mbox-cells = <2>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt deleted file mode 100644 index c2aeba63bd47..000000000000 --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt +++ /dev/null @@ -1,82 +0,0 @@ -MediaTek GCE -=============== - -The Global Command Engine (GCE) is used to help read/write registers with -critical time limitation, such as updating display configuration during the -vblank. The GCE can be used to implement the Command Queue (CMDQ) driver. - -CMDQ driver uses mailbox framework for communication. Please refer to -mailbox.txt for generic information about mailbox device-tree bindings. - -Required properties: -- compatible: can be "mediatek,mt8173-gce", "mediatek,mt8183-gce", - "mediatek,mt8186-gce", "mediatek,mt8192-gce", "mediatek,mt8195-gce" or - "mediatek,mt6779-gce". -- reg: Address range of the GCE unit -- interrupts: The interrupt signal from the GCE block -- clock: Clocks according to the common clock binding -- clock-names: Must be "gce" to stand for GCE clock -- #mbox-cells: Should be 2. - <&phandle channel priority> - phandle: Label name of a gce node. - channel: Channel of mailbox. Be equal to the thread id of GCE. - priority: Priority of GCE thread. - -Required properties for a client device: -- mboxes: Client use mailbox to communicate with GCE, it should have this - property and list of phandle, mailbox specifiers. -Optional properties for a client device: -- mediatek,gce-client-reg: Specify the sub-system id which is corresponding - to the register address, it should have this property and list of phandle, - sub-system specifiers. - <&phandle subsys_number start_offset size> - phandle: Label name of a gce node. - subsys_number: specify the sub-system id which is corresponding - to the register address. - start_offset: the start offset of register address that GCE can access. - size: the total size of register address that GCE can access. - -Optional properties for a client mutex node: -- mediatek,gce-events: GCE events used by clients. The event numbers are - defined in 'dt-bindings/gce/<chip>-gce.h'. - -Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h', -'dt-bindings/gce/mt8183-gce.h', 'dt-bindings/gce/mt8186-gce.h' -'dt-bindings/gce/mt8192-gce.h', 'dt-bindings/gce/mt8195-gce.h' or -'dt-bindings/gce/mt6779-gce.h'. -Such as sub-system ids, thread priority, event ids. - -Example: - - gce: gce@10212000 { - compatible = "mediatek,mt8173-gce"; - reg = <0 0x10212000 0 0x1000>; - interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_GCE>; - clock-names = "gce"; - #mbox-cells = <2>; - }; - -Example for a client device: - - mmsys: clock-controller@14000000 { - compatible = "mediatek,mt8173-mmsys"; - mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST>, - <&gce 1 CMDQ_THR_PRIO_LOWEST>; - mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF - CMDQ_EVENT_MUTEX1_STREAM_EOF>; - mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>, - <&gce SUBSYS_1401XXXX 0x2000 0x100>; - ... - }; - -Example for a client mutex node: - mutex: mutex@14020000 { - compatible = "mediatek,mt8173-disp-mutex"; - reg = <0 0x14020000 0 0x1000>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_MUTEX_32K>; - mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>, - <CMDQ_EVENT_MUTEX1_STREAM_EOF>; - }; -- 2.37.2
